Sharp DK-A10 User Manual page 27

DK-A10
DK-A10BK
End time
Alarm start time
- - -
-
-//-
- - -
----1/-----
Alarm setting
Sleep operation will
automatically stop
Sleep timer setting
1 Set the sleep time (see left, steps 1 - 4).
2 While the sleep timer is set, set the alarm
(steps 1 - 6, page 26).
3 Activate the alarm (see page 26)
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the SLEEP button on the
remote control once to select "SLEEP XXX".
"XXX" is sleep remaining time.
• The remaining sleep time is displayed for about 10 seconds.
• You can change the remaining sleep time while it is displayed by
pressing the SLEEP button (steps 2 - 3).
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the SLEEP button to select
"SLEEP OFF", and press the MEMORY button.
• To use alarm and sleep operation together
Sleep and alarm:
For example, you can fall asleep listening to the radio and wake up
to iPod in the next morning.
I 1 \
I
I
i
i
3
Press the MEMORY button.
"SLEEP" will appear.
2
Press the SLEEP button to select sleep time.
4
The unit will enter the clock function automatically after the
preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
• Snooze function
Once timer playback has started, pressing the SNOOZE/DIMMER
button will stop alarm for 5 minutes.
Once the snooze time has expired, alarm will continue.
• To turn off the alarm function
During alarm or snooze, press the ALARM ON/OFF button to turn it
off.
• Sleep operation
The radio, compact disc and iPod can be turned off automatically.
1
Playback the desired sound source.
27