Stopping The Engine; Disengage Lever - Husqvarna Rider Pro 15 Operator's Manual

WARNING!
Never drive the machine on
ground at an angle of more than
15°. Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.

Stopping the engine

Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
3. When the Rider is at a standstill, press down the
parking brake and push in the locking button.
Release lever
The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
The diagram shows the release lever in the out
position.
18
– English
DRIVING
MAX 15