JVC VN-H37U Instructions Manual page 9

Uploading and downloading of the
Language File
You can change the language on setting pages and built-in viewer of the camera.
● Procedure
(1) Click "Download" button on the Maintenance page.
(2) Save "language.ini" file to the appropriate folder in the PC.
(3) Edit the downloaded "language.ini" file using Notepad or general purpose text editor.
- Current texts are described after "=". Change them to desired text.
- You can write comments after the ";". Comments are annotations for each line and all the text
from the ";" to the end of the line is ignored.
- Maximum number of texts in one line is 126 bytes.
- Save the file after editing. Do not change the file name.
- Western European language (ISO-8859-1) is supported. Double byte character set is not
supported.
(4) Click "Browse" button on the Maintenance page and select "language.ini" file which you edited.
(5) Click "Upload" button on the Maintenance page.
(6) Select "Custom", then click "Apply" button on the Maintenance page.
- Language is replaced after reloading the Maintenance page. When language is not replaced,
please reload the Maintenance page again.
● Following GUI is added to Maintenance page.
9