JVC VN-H37U Instructions Manual page 33

A
Action
B
1st Trigger
C
Max. Interval
D
2nd Trigger
Set an action type to be taken if an alarm occurs.
E options vary depending on the selected action.
Disable : Takes no action.
Mail : Sends an alarm e-mail. Set the destination mail address.
The mail has the header name of "Alarm from model-
name: Alarm No." (for example, "Alarm from VN-H37:
No.1" for the VN-H37U), and has the sender name of
"Camera ID". Enter a send message in the [Mail text]. You
can enter a text consisting of up to 127 alphanumeric
characters. Or a text of up to 63 dual-byte characters can
be entered. To attach the latest image to the mail, check
the JPEG Attachment checkbox.
TCP : Uses the TCP and sends a character string entered in
[TCP Data] field to the destination that you have set using
the [TCP/IP Address] and [TCP Port Number].
Memo:
● To attach the latest image to the TCP send data, check the JPEG
Attachment box.
UDP : Uses the UDP and sends a character string entered in
[UDP Data] field to the destination that you have set using
the [UDP IP Address] and [UDP Port Number].
Switch Scene File: Changes the scene file. For details about the scene file,
see B [Scenefile] in the [Camera] page. (A Page 18)
Position : Moves to the preset position specified by the [Action
Position No.] item E. (A Page 35)
[Set values: Disable, Mail, TCP, UDP, Switch Scenefile, Position]
Sets the first trigger to take action.
F options vary depending on the selected trigger.
[Set values: Position, Motion detection, Day/Night, Tampering Detection,
Time]
Unavailable.
Unavailable.
* The [Set values] in bold letters are factory defaults.
33