NEC Express5800 User Manual page 301

5.
When the following message is displayed, press S.
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices.
The following message is displayed.
Please insert the disk labeled
manufacturer-supplied hardware support disk
6.
Insert the Windows 2000 OEM-DISK for NEC EXPRESSBUILDER into the floppy disk
drive, and press Enter.
A list of mass storage devices is displayed.
7.
Select the proper SCSI Adapter and press Enter.
– Promise SuperTrak EX8350/8300 Controller-Intel x86 platform
(When N8103-101 board is installed.)
– Promise SuperTrak EX4350 Controller-Intel x86 platform
(When N8103-103 board is installed.)
8.
When the following message is shown, press Enter to start "Welcome to Setup".
9.
When the installation of Windows 2000 Server has finished, the system reboots
automatically.
into Drive A:
*Press ENTER when ready.
Installing Windows 2000 F-5