9-42 Upgrading Your Server
10.
While pushing the both hooks on rear of the bracket, remove the bracket from the bracket
cover.
11.
Install the bracket cover.
12.
Run BIOS SETUP utility to change settings for floppy disk drive.
Select [Main] → [Legacy Diskette A:] → [1.44/1.25 MB 31/2"]. Then, select [Exit] →
[Exit Saving Changes], and reboot the server.
To boot the server from the floppy disk drive, change boot priority using the BIOS
SETUP utility.
On the [Boot] menu, put the cursor on "Legacy Floppy Drives" under the "Excluded from
boot order", and press x to include it in the "Boot priority order". Then, press + to move
the device to the desired order. In normal case, set the third priority for the floppy disk
drive (next to CD-ROM drive).
Bracket cover