Table of Contents
Advertisement
Meet-Me Adhoc
It is possible that a user who does not know the conference joining
information (Conference ID, password etc.) can join a Meet-me conference.
This feature is called Meet-Me Adhoc and there are two ways to transfer a
current call onto a Meet-me conference.
1) When in Conversation
When user A and B are in a conversation, <A> can make <B> join Meet-
me conference.
(a)
During conversation, <A> selects [TRSF]+[MJOIN].
(b)
Meet-me conference join flow is started.
In this case opposite party <B> is on hold.
(c)
After completing join flow, <B> joins the conference and <A> is
disconnected.
2) In case of Meet-me Conference
When user A joins Meet-me conference, <A> can make <B> join current
conference without disconnecting <A> itself.
(a)
During Meet-me conference, <A> selects [MJOIN].
(b)
When hearing dial tone, <A> dials the number of <B>.
(c)
After connecting with <B>, <A> selects [MJOIN] again.
Then both <A> and <B> join the conference at the same time.
In this case the join flow is not needed because <A> is already an
authorized member of the conference.
© SAMSUNG Electronics Co., Ltd.
CNF24 User Guide
56
Advertisement
Table of Contents
