Figure 4.6 Mjoin Feature Code - Samsung CNF24 User Manual

Join Meet-Me Conference
1.
Dial Meet-Me Feature key or code
Settings for internal and external user are different as shown below.
Internal user
There are two ways to start Meet-Me join flow.
External user
2.
Dial Conference ID
Participant hears announcement which requests to dial conference ID.
Participant should dial conference ID following examples below.
Conference ID (xxx) + End Digit ('#')
Conference ID (xxx) + Member Login Index (yy) + End Digit ('#')
© SAMSUNG Electronics Co., Ltd.
Assign <MJOIN> key to station user in DM 4.9.2.
Select MJOIN key.
Assign <MJOIN> feature code value in DM 2.8.0.
Dial MJOIN feature code.
Set DID routing table in DM 3.2.3 to allow external user to join
Meet-Me conference.
(1) Assign <MJOIN> feature code value in DM 2.8.0. (ex. 88)
(2) Input specific digits as Incoming digits in DM 3.2.3. (ex. 200)
(3) Input MJOIN feature code as its Ring Plan in DM 3.2.3.

Figure 4.6 MJOIN Feature Code

4 digits (Simple way)
User will join the conference as an Anonymous.
6 digits.
Member Login Index can be 00 to 99. If user dials 99 as member
CNF24 User Guide
49