Table of Contents
Advertisement
Updating CNF24 Setup Information
Each CNF24 has unique MAC address and the system manages card
information by using its MAC address. So if the location of CNF24 is
changed, the setup information should be updated as in following cases.
On initial installation of the CNF24 in slot A.
Installer does not have to update the setup information.
When CNF24 from slot A is moved to another slot B.
CNF24 information is automatically updated in slot B. The installer should
delete previous CNF24 information of slot A in DM 6.3.1.
When current CNF24 is swapped with another CNF24 in the same slot.
Installer does not have to update installation information. The new card
Mac address is updated automatically.
When current CNF24 installed in slot A is pulled out and another CNF24 is
installed in slot B.
Installer should clear previous setup information from slot A to update new
CNF24 information. In this case the installer should assign a new IP
address to CNF24 installed in slot B. (in DM 2.2.16)
© SAMSUNG Electronics Co., Ltd.
CNF24 User Guide
19
Advertisement
Table of Contents
