Customize Your Headset; Multipoint - Plantronics Voyager Legend User Manual
Hide thumbs
Also See for Voyager Legend:
- User manual (14 pages) ,
- User manual (13 pages) ,
- User manual (11 pages)
Table of Contents
Advertisement
Customize your headset
Multipoint
1
Switch on the headset.
2
Press and hold the Voice button until you hear a double tone.
3
Repeat to reactivate the voice answer commands.
Your headset understands and speaks in English. You can change the language and other
settings online.
™
MyHeadset
Updater tool enables you to:
• Receive firmware updates
• Change language for voice alerts and commands (English U.K., French, German, and Spanish.
Voice alerts are also available in Cantonese and Mandarin.)
• Change regional phone number for Vocalyst service
• Turn voice commands on/off
™
• Turn Smart Sensors
on/off
• Turn high quality audio (A2DP) streaming on/off
• Turn "mute off" voice alert on/off
™
Download MyHeadset
Updater
1
Connect your headset and USB cable to your computer.
2
Download the MyHeadset
3
Edit language, regional settings, configure other features, and download updates when available.
Voyager Legend supports multipoint technology, which allows you to use one headset with two
different Bluetooth mobile phones. To pair your headset to a second phone, see "Pair another
phone".
To answer a second call on the other phone, the current call must be terminated or transferred
back to the first phone. If you choose not to answer, the second call will go to voice mail.
1
Tap the Call button
to end the first call.
2
Tap the Call button
again to answer the second call
NOTE
To avoid issues with multipoint, use the Call button
controls.
™
Updater tool from plantronics.com/myheadset.
on the headset rather than your phone
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Voyager Legend and is the answer not in the manual?
Questions and answers
my headset suddenly shows as "connected music" on my laptop and is not available to select as a microphone for output. is the microphone suddenly shot? or is there a setting for this to turn the mic back on?
To fix the microphone issue on your Plantronics Voyager Legend headset when it shows as "connected music" on your laptop, follow these steps:
1. Check Bluetooth Connection – Ensure the headset is properly connected to your laptop via Bluetooth and within the effective range (10 meters).
2. Set Default Recording Device – Go to your laptop’s sound settings and set the Voyager Legend as the default input (microphone) device.
3. Power Cycle the Headset – Turn the headset off and then back on to reset connectivity.
4. Update Firmware – Use the MyHeadset™ Updater tool from Plantronics to update the headset firmware.
5. Reset the Headset – If issues persist, reset the headset by holding down the power button for a few seconds until it turns off, then turn it back on.
Following these steps should resolve the issue.
This answer is automatically generated
can you pair more than one phone?
Yes, the Plantronics Voyager Legend has Multipoint Technology, which allows it to pair and connect with two Bluetooth devices at the same time. However, it cannot be used with both devices simultaneously; it enables answering calls from either device.
This answer is automatically generated