Do you have a question about the Voyager Legend and is the answer not in the manual?
Questions and answers
Yolanda
April 15, 2025
Cambiar el idioma de inglés a español
1 comments:
Mr. Anderson
April 15, 2025
To change the language from English to Spanish on the Plantronics Voyager Legend, follow these steps:
1. Go to http://www.plantronics.com/us/support/myheadset/updater. 2. Select the Plantronics Voyager Legend headset. 3. Install the required software (MyHeadset™ Updater). 4. Connect your headset to your computer using a USB cable. 5. In the updater tool, choose Spanish as the language. 6. Save the settings and start the update.
Your headset will now use Spanish for voice alerts.
Summary of Contents for Plantronics Voyager Legend
Page 1
Voyager Legend ™ User Guide This version of the wordmark can only be used at this size. It has a larger registration mark than the other size wordmarks. Please use one of the other sizes if you need...
Contents What’s in the box Headset overview Pairing Pair first time Pair another phone Charge Change the eartip Wear on the left or right The basics Make/take/end calls Mute Adjust the volume Use sensors Play or pause streaming audio More features Voice alerts Voice commands Customise your headset...
What’s in the box Headset USB charge cable EURO + UK AC charger Foam eartip covers and silicone eartips Car charger This version of the wordmark can only be used at this size. It has a larger registration mark than the other size wordmarks. Please use one of the other sizes if you need a larger version.
Headset overview voice Call button Volume button Headset LED (indicator light) Power button Magnetic charge port Mute button Voice button Play/Pause button Be safe! Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset. This version of the wordmark can only be used at this size.
Pairing Pair first time The first time you switch on your headset it begins the pairing process. Place the headset on your ear and turn it on. While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone and set it to search for new devices.
Charge Your new headset has enough power to pair and make a few calls before charging is needed, though you may charge at any time. Align snap-fit magnetic areas of headset and USB cable. Attach cable to USB wall charger or laptop for 90 minutes. LEDs turn off once fully charged. This version of the wordmark can only be used at this size.
Change the eartip Change the eartip for a better fit. Push in eartip and rotate to the left to unlock it. Align new eartip into slot. Rotate it to the right to lock it into place. Wear on the left or right To wear the headset on your other ear, rotate the boom upwards then twist it around so the eartip is on the other side before lowering the boom.
The Basics voice Make/take/end calls Answer a call Choose: • Place the headset on your ear to answer call, or • Say “answer” after call is announced, or • Tap the Call button NOTE You can change the voice command language via the MyHeadset Updater tool. The avail- ™ able languages are English UK, French, German and Spanish. See Voice Commands for details. Answer a second call First, tap the Call button to end current call, then tap the Call button...
However, in the following situations, an incoming caller name is not announced: • if you use the sensors to automatically answer a call while putting on your headset • if the caller is unknown, unlisted, or blocked. Mute During a call, you can mute the microphone. Tap the Mute button . You will hear “mute on” confirmation. An alert repeats every 15 minutes to remind you of microphone mute.
, wait for command request, then say a command. For example, “What can I say?” tells you the full list of available commands. You can change the voice command language by visiting plantronics.com/myheadset and downloading the MyHeadset Updater tool. The available languages are English U.K., French, German, ™...
Edit language, regional settings, configure other features, and download updates when available. Multipoint Voyager Legend supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones. To pair your headset to a second phone, see “Pair another phone”.
Specifications Talk time Up to 7 hours Standby time Up to 11 days Operating distance (range) Up to 10 meters (33 feet), Class II Headset weight 18 grams Charge connector Micro USB cable with magnetic snap-fit connection to headset, modular AC wall charger 100-240v, car charger Battery type Rechargeable non-replaceable lithium ion polymer Charge time (maximum)
Need help?
Do you have a question about the Voyager Legend and is the answer not in the manual?
Questions and answers
Cambiar el idioma de inglés a español
To change the language from English to Spanish on the Plantronics Voyager Legend, follow these steps:
1. Go to http://www.plantronics.com/us/support/myheadset/updater.
2. Select the Plantronics Voyager Legend headset.
3. Install the required software (MyHeadset™ Updater).
4. Connect your headset to your computer using a USB cable.
5. In the updater tool, choose Spanish as the language.
6. Save the settings and start the update.
Your headset will now use Spanish for voice alerts.
This answer is automatically generated