Firmware Upgrade - Sena SPH10H User Manual

Bluetoth stereo headset and intercom for half helmet

Hide thumbs Also See for SPH10H:

Table of Contents

SPH10H

2. Insert a paper clip into the reset pin-hole and press

the reset button for 1 second with light pressure, at

which time the SPH10H will be switched off. Turn

the SPH10H back on. By powering back on, this will

restore your current settings.

23. FIRMWARE UPGRADE

The SPH10H supports firmware upgrade function.

Please visit Sena Bluetooth web site at www.sena.

com to check the latest software downloads.

Table of Contents

Do you have a question about the SPH10H and is the answer not in the manual?