Mechanical ventilation with heat recovery (32 pages)
Summary of Contents for Airflow iCON
Page 1
Domestic DC Fans Installation and Operating Guide 12V SELV Base Models: iCON eco15S – 72683701 (15S) iCON eco30S – 72683801 (30S)
Page 2
Installation, Maintenance and Use iCON Domestic DC Fans are available in 2 model sizes and can be fitted into a wall or ceiling. Each fan requires a suitable size hole through the wall or ceiling which connects into a duct venting to the outside.
Page 3
NEVER COVER THE POWER SUPPLY UNIT WITH THERMAL INSULATION MATERIALS Fan Unit iCON Domestic DC Fans can be recessed in a wall or ceiling. A mounting skirt is provided for surface mounting of the 30S. To avoid the backflow of condensation into the fan in...
Page 4
Front Cover Removal The front cover has a bayonet type fitting. To remove, undo the retaining screw at the bottom edge of the cover using a screwdriver, then rotate the cover a few degrees anticlockwise and remove. To refit, reverse the above UNDO THE RETAINING procedure.
Page 5
The 15S requires a 110mm diameter hole through the ceiling. The fan should be fixed with the screws provided, through the plaster board into the support. The 30S requires a 160mm diameter hole through the ceiling. The fan should be fixed with the screws provided, through the plaster board into the support.
Part “P” U.K. Building Regulations and to the latest IEEE standards, or the appropriate regulations in the country of installation. iCON Domestic DC fans require a 12V dc supply via the power supply unit. Wiring with no control module fitted.
Page 7
Never clean any parts of the fan assembly by immersing in water or using a dishwasher. Warranty Applicable to units installed and used in the United Kingdom. Airflow guarantees the iCON Domestic DC Fans for 2 YEARS from date of purchase against faulty material or workmanship.
Need help?
Do you have a question about the iCON and is the answer not in the manual?
Questions and answers