Water Inlet Fault - Miele G 6160 Operating Instructions Manual

Water inlet fault

Problem
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
The Inlet/Drain
indicator is flashing on
and off.
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
The Inlet/Drain
indicator is flashing and
fault code  or  has
appeared in the display.
Cause and remedy
The stopcock is closed.
 Open the stopcock fully.
Before rectifying the problem:
 Switch the dishwasher off with the  button.
The water intake is restricted.
 Open the stopcock fully and start the programme
again.
 Clean the water inlet filter (see "Maintenance").
 The water pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
Problem solving guide
69