Optimise Standby - Miele G 6160 Operating Instructions Manual

Programme options

Optimise standby

"Optimise standby" is activated by
default.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a
programme.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off
increases to 6 hours. Doing this will
increase energy consumption.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in, and whilst holding it in switch
the dishwasher on using the 
button.
Keep the programme selector button
 pressed in for at least four
seconds until the lower right hand
programme indicator comes on.
If this does not happen, start the
procedure from the beginning again.
56
 Press the  button 8 times.
The  indicator will flash rapidly 8
times at intervals.
The flashing sequence in the display
shows whether Optimise standby is
activated or not.
–  : "Optimise standby" is activated
–  : "Optimise standby" is switched
off
 Press the programme selector button
 if you wish to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.