Starting The Programme; Display - Miele G 6160 Operating Instructions Manual

Starting the programme

 Start the programme by closing the
door.
The programme will begin.
The In-operation indicator light comes
on to show that a programme has been
started.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.

Display

The duration of the programme
selected appears in hours and minutes
in the display before the programme
begins. During the programme the time
left until the end of the programme is
displayed.
The programme duration displayed may
vary with the same programme. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of
detergent, the amount of crockery and
how dirty it is.
When a programme is selected for the
first time, the display shows an average
duration for a cold water intake.
The durations shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the
programme duration required.
Operation
45