Maintenance & Adjustment - Cub Cadet RZT50VT Operator's Manual

Maintenance & Adjustments
Maintenance Schedule
Check Engine Intake Screen/Cover
Clean Hood/Dash Louvers
Check Engine Oil Level
Check Air Filter for Dirty, Loose or Damaged Parts
Clean and Re-oil Air Filter's Foam Precleaner
Replace Air Filter Element
Change Engine Oil and Replace Oil Filter
Clean Battery Terminals
Lube Front Pivot Axle and Caster Axles
Clean Engine Cooling Fins
Lube Front Deck Wheels
Check Spark Plug Condition & Gap
Replace Fuel Filter
Maintenance
WARNING!
repairs, disengage the PTO, move the drive control
levers fully outward in the neutral position, engage
the parking brake, stop the engine and remove the
key to prevent unintended starting.
Engine
Refer to the Briggs & Stratton Owner's Manual for all engine
maintenance intervals, procedures, specifications and
instructions.
Hydrostatic Transmission
The zero turn tractor is equipped with dual integrated
hydrostatic pumps/transaxles that are sealed and are
maintenance-free. Fluid levels cannot be checked and fluid
cannot be added or changed.
22
Before
Each use
P
P
P
Before performing any maintenance or
Every Every
10 Hours 25 Hours 50 Hours
P
P
P
P
P
P
P
Changing the Engine Oil
WARNING!
If the engine has been recently run, the
engine, muffler and surrounding metal surfaces will
be hot and can cause burns to the skin. Exercise
caution to avoid burns.
To complete an oil change, proceed as follows:
1. Run the engine for a short time to warm the engine oil. The
oil will flow more freely and carry away more impurities.
Use care to avoid burns from hot oil.
2. Locate the oil drain port on the right side of the engine.
Every Every Prior
100 Hours to Storing
P
P
P
P
P
P
P
P P
P
6