Switching Channels; Directly Selecting Channels - Silvercrest LT 710 User Manual And Service Information

English
For tuning-in a station you can also use the manual search
(see page 21).

Switching Channels

When switching a channel in DVB-T mode, some information will be
displayed shortly on the bottom of the screen. The information shows the
channel name, the current programme preset (memory), the audio setting
and the operating mode.
Programme preset
Mode

Directly Selecting Channels

Press one of the numeric buttons (11) to select the desired channel directly.
If the preset channel required more than one digit, press the corresponding
numeric buttons in sequence (e.g. 1 and then 2 for 12).
When entering one digit the device will wait for the next input.
To accelerate the channel selection you can press the OK
button (20).
In TV mode you must toggle between one-digit, two-digit and
three-digit numbers by using the button (25).
16
Channel name
SilverCrest LT 710
Audio setting