Huawei eSpace 6810 User Manual page 20

Huawei IP Phone eSpace 6810
User Manual
Field
802.1X mode
Iine Keys
Time Zone
LCD Backlight
Brightness
LCD Contrast
Time Display Format
Disable in-call DTMF
display
Disable Missed Call
Backlight
HEADSET Key Mode
Call History Flash
Issue 01 (2011-12-07)
Description
PPPoE session if any of the PPPoE fields are set.
Host Name and Domain Name:The special DHCP options that
are added to the DHCP Discover and DHCP Request after
configuration.
Preferred DNS: The eSpace 6810 uses the DNS server if
Preferred DNS is configured.
 Static IP Mode:
Configure all of the following fields: IP address, Subnet Mask,
Gateway, Default Router IP address, DNS Server 1 (primary),
and DNS Server 2 (secondary).
This parameter is set to perform the 802.1X authentication when
the IP phone is connected to a switch. You can click Disable to
disable the authentication function, and click EAP-MD5 to
perform the registration authentication.

IdentifyID used during the 802.1x authentication
 MD5 PasswordMD5 password used during the 802.1X
authentication
This parameter is set for specifying function modes of line keys.
By default, the value of Key Mode is Line, which is used by
common lines. If the value of Key Mode is Shared Line, it
indicates that accounts scattered in various areas can share the
line.
This parameter controls the date and time display according to the
specified time zone. If the DHCP Option 2 is enabled, the DHCP
server overrides and centrally controls the setting of Time Zone in
the phone. The feature functions on the phone only when you set
the NTP server correctly.
This parameter is set for adjusting the LCD brightness of the IP
phone in active and idle states. The value ranges from 0 to 8.
LCD contrast. The value ranges from 0 to 20.
The LCD time is displayed in 12-hour or 24-hour format.
The default value is No. If the parameter is set to Yes, the DTMF
digits that are pressed during the call will not be displayed on the
LCD for security reasons.
The default value is No. By default, the LCD backlight is on when
a missed call exists.
Select default answering or dialing mode as the headset mode.
When selecting a default mode, press HEADSET to enter the
headset dialing status. If you press HEADSET when setting
Toggle Headset/Speaker, the headset icon is displayed on the
LCD. In this case, press
call in Headset mode.
This parameter is set for configuring the duration of recording
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the eSpace 6810
, you can make a call or answer a
16