Table of Contents
Advertisement
P u s h t o t a l k
Push to talk service settings
For availability of settings for the push to talk service, contact
your network operator or service provider. You may receive the
settings over the air. See Over the air settings service on page 21.
Editing and activating the settings
1. Press Menu, and select
2. To key in the settings, select
the set you would like to activate, and press Activate.
3. Select
Edit active service
one by one, and key in all the required settings according to
the information that you received from your network
operator or service provider. Note that the
settings
submenu contains the required connection settings.
Connecting to and disconnecting from the
push to talk service
• To connect to the push to talk service, press Menu, and select
Push to talk
connection.
unavailable. The phone automatically tries to reconnect to
the service until you disconnect from the push to talk service.
If you have added group(s) to the phone, you are
automatically joined to the active
groups, and the name of the default group is displayed in
standby mode.
• To disconnect from the push to talk service, select
off.
Making and receiving a push to talk call
Set the phone to use either loudspeaker or earpiece for push to
talk communication. When the earpiece is selected, you can use
the phone normally to your ear.
Push to talk
settings. Select each of the settings
→
Switch PTT
on.
indicates that the service is temporarily
→ Settings.
Active service
settings, scroll to
Connection
indicates the push to talk
(Default
and Listened)
75
Switch PTT
Advertisement
Table of Contents
