Access Codes; Changing The Shell And Key Mat - Nokia 5140 User Manual

G e t t i n g s t a r t e d

Access codes

• Security code: This code is supplied with the phone. The
security code protects your phone against unauthorized use.
The pre-set code is 12345.
Change the code, and keep the new code confidential and in
a safe place separate from your phone. You can change the
code and set the phone to request the code. See Security
settings on page 66.
• PIN code: The personal identification number (PIN) code may
be supplied with the SIM card. It protects your SIM card
against unauthorized use. Set the phone to request the PIN
code each time the phone is switched on. See Security
settings on page 66.
• PIN 2 code: This code may be supplied with the SIM card and
is required to access some functions.
• PUK and PUK2 codes: These codes may be supplied with the
card. Otherwise, contact your local service provider for the
codes.
• Barring password: The barring password is required when
using the Call barring
• Module PIN and signing PIN: The module PIN is required to
access the information in the security module. See Security
module on page 100. The signing PIN is required for the
digital signature. See Digital signatures on page 101. The
module PIN and signing PIN are supplied with the SIM card if
the SIM card has a security module in it.
• Wallet code: This code is required to access the wallet service.
See Wallet on page 85.

Changing the shell and key mat

Note: Before removing the cover, always switch off the
power and disconnect the charger and any other device.
Avoid touching electronic components while changing
service. See Security settings on page 66.
15