Related Manuals for CTEK Multi XS 7000
Summary of Contents for CTEK Multi XS 7000
-
Page 1: Battery Charger
MULTI XS 7000 Battery charger For lead-acid batteries 14–225Ah User Manual and guide to professional battery charging for Starter and Deep Cycle batteries. Model 1007... -
Page 2: Battery Types And Settings
CTEK SWEDEN AB. It represents the state-of-the-art technology for battery charging. A MULTI XS 7000 will prolong the lifetime of your battery. Read this user manual and follow the instructions carefully before using the charger. -
Page 3: Various Modes
It is not appropriate to charge a completely discharged battery in Supply mode, since this will not result in a completely charged battery. The MULTI XS 7000 can also be used as a power supply without a battery attached in this setting. No counter voltage is required to start the charger in this mode. -
Page 4: Charging Phases
CHARGING PHASES Mode chosen: ”NORMAL” or ”SNOWFLAKE” MULTI XS 7000 is a multi stage fully automatic charger. Lamp B for chosen setting ”NORMAL” and lamp C for chosen setting ”SNOWFLAKE”. Desulphation (Lamp 1, blinking) Desulphation with pulsing for sulphated batteries. Indicated by blinking lamp 1. -
Page 5: Temperature Protection
It is not appropriate to charge a completely discharged battery in Supply mode, since this will not result in a completely charged battery. In this mode, MULTI XS 7000 can also be used as a power generation unit for operating equipment that requires 13.6V and a maximum of 7A. -
Page 6: Maintenance
The case can be cleaned with a soft damp cloth and mild cleanser. The charger should be disconnected from the power supply while cleaning. EQUIPMENT MULTI XS 7000 is delivered with a set of battery cables with battery pole clamps and a set of battery cables with eyelet terminals. WARRANTY CTEK SWEDEN AB, Rostugnsvägen 3, 776 70 VIKMANSHYTTAN, SWEDEN provides a lim-... -
Page 7: Manufacturer's Declaration
CTEK SWEDEN AB, Rostugnsvägen 3, 776 70 VIKMANSHYTTAN, SWEDEN. Declares under sole responsibility that the battery charger MULTI XS 7000, to which this declaration relates is in conformity with the following LVD standards: EN 60335-1, EN 60335-2-29 according to the terms of directive 73/23/EEC with the addition of 93/68/EEC. -
Page 8: Indicators
INDICATIONS Indication Description Error mode, the charger suspends the charging / voltage maintenance. See further description below. Start mode. Bulk charging, maximum voltage. Absorption charging, voltage limited to chosen voltage. Pulse maintenance charging Supply mode, fixed output voltage, no counter voltage requirement. Recond charging STANDBY Mode ”NORMAL”...
Need help?
Do you have a question about the Multi XS 7000 and is the answer not in the manual?
Questions and answers