Huawei SmartAX MT882 User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Network Router
  5. SmartAX MT882
  6. User manual
Huawei SmartAX MT882 User Manual

Huawei SmartAX MT882 User Manual

Adsl router
Hide thumbs Also See for SmartAX MT882:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
SmartAX MT882 ADSL Router

User Manual

HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei SmartAX MT882

Summary of Contents for Huawei SmartAX MT882

  • Page 1: User Manual

    SmartAX MT882 ADSL Router User Manual HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Copyright © Huawei Technologies Co., Ltd. 2008. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

  • Page 3: Safety Precautions

    Without prior written consent, no organization or individual is permitted to make any change to the structure or safety design of the device. Huawei Technologies Co., Ltd. is not liable to any consequences or legal issues due to such changes.
  • Page 4 Operating Requirements: Do no let a child operate the device without guidance. Do not let a child play with the device or any accessory. Swallowing the accessories may lead to peril. Use the accessories provided or authorized by the manufacturer only.
  • Page 5 Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils.

  • Page 6: Table Of Contents

    Table of Contents Chapter 1 Introduction ..............1 1.1 Functions and Features............1 1.2 Appearance ................1 1.2.1 Front Panel ..............2 1.2.2 Rear Panel..............4 Chapter 2 Installation of the MT882 ..........6 2.1 Preparation................6 2.2 Connecting the MT882 ............6 2.3 Setting Up the Configuration Environment......8 2.3.1 Planning the Parameters ..........8 2.3.2 Operation ..............9 2.4 Web Setup Page ..............10...
  • Page 7 4.1.2 Steps.................29 4.2 Service Modes of the MT882 ..........30 4.3 Configuring the Pure Bridge Mode........32 4.3.1 Preparation ...............32 4.3.2 Steps.................33 4.4 Configuring the PPPoE Mode ..........34 4.4.1 Preparation ...............34 4.4.2 Steps.................35 4.5 Configuring the PPPoA Mode ..........36 4.6 Configuring the RFC2684B Mode ........37 4.6.1 Preparation ...............37 4.6.2 Steps.................38 4.7 Configuring the RFC2684(IPoA) Mode .......39...
  • Page 8 8.1.1 Common Default Parameters ........50 8.1.2 Default PVC Parameters ..........50 8.2 Acronyms and Abbreviations ..........51...

  • Page 9: Chapter 1 Introduction

    Chapter 1 Introduction This chapter describes the functions and the appearance of the SmartAX MT882 ADSL Router (hereinafter referred to as the MT882). 1.1 Functions and Features The MT882 is a type of Asymmetric Digital Subscriber Line (ADSL) terminal. Using the MT882 and a telephone line, you can enjoy data, video and audio services at a high speed.

  • Page 10: Front Panel

    1.2.1 Front Panel Figure 1-1 shows the front panel of the MT882. Figure 1-1 Front panel of the MT882 Note: The figure of the front panel is only for your reference. Table 1-1 describes the indicators on the front panel. Table 1-1 Indicators on the front panel Indicator Status...
  • Page 11 Indicator Status Description Blinking The MT882 is being activated. green light The MT882 is activated. Blinking orange The built-in PPP dial-up software is dialing. ADSL light LINK Steady The built-in PPP dial-up software orange completes dialing successfully. light The telephone line is not connected or the MT882 is preparing for the next activation.

  • Page 12: Rear Panel

    Indicator Status Description Steady The USB interface is connected. green light Blinking Data is being transmitted over the USB green light interface. The USB interface is not connected. Note: If the MT882 fails to activate, it tries again after one minute. The ADSL LINK indicator is off during this period.
  • Page 13 Note: The figure of the rear panel is only for your reference. Table 1-2 describes the interfaces and buttons on the rear panel. Table 1-2 Interfaces and buttons on the rear panel Interface/Button Description ADSL It connects with the Modem interface of a splitter. It connects with a computer.

  • Page 14: Chapter 2 Installation Of The Mt882

    Chapter 2 Installation of the MT882 This chapter introduces the installation of the MT882. 2.1 Preparation Before installing the MT882, prepare the following components: Ethernet card: The MT882 communicates with a computer through an Ethernet card. Make sure that an Ethernet card is installed on the computer before connecting the MT882 with the computer.
  • Page 15 (1) PC (2) Phone (3) RJ-11 telephone line (4) Splitter (5) RJ-11 telephone line (6) Phone jack (7) RJ-11 telephone (8) MT882 (9) RJ-45 Ethernet cable line Figure 2-1 Connecting the MT882 Caution: Before connecting the MT882, power off the MT882 and the computer.

  • Page 16: Setting Up The Configuration Environment

    Operation: Connect the interfaces of the splitter with other devices by using a telephone line: LINE interface --> telephone jack on the wall MODEM interface --> ADSL interface of the MT882 PHONE interface --> telephone Connect the Ethernet interface of the MT882 with the Ethernet interface of the computer by using a straight through cable.

  • Page 17: Operation

    Table 2-1 Parameters for the configuration environment Item Description Default: Username and password of the administrator of the Username: admin MT882 Password: admin Default: LAN IP address and subnet mask of the IP address: 192.168.1.1 MT882 Subnet mask: 255.255.255.0 Make sure that the IP address of the computer is in the same network segment as the LAN IP address of the IP address and subnet...

  • Page 18: Web Setup Page

    Step To... Do... Taking Internet Explorer 6.0 as an example: Launch the Internet Explorer. Choose Tools > Internet Options... to Check and display the Internet Options dialog ensure that box. the proxy Choose the Connections tab and click server is not LAN Settings..

  • Page 19: Chapter 3 Installation Of The Usb Driver

    The navigation tree: On the left of the page, it allows you to access different setup pages. Configuration area: On the right of the page, it displays the configuration data. Chapter 3 Installation of the USB Driver You need to install the USB driver on your PC before using the USB connection.
  • Page 20 Edit file located on /etc/rc.d/rc.local, append two lines as below: insmod /usr/local/lib/trendchip/trendchip.o &>/dev/null & ifconfig eth1 192.168.1.2 up &>/dev/null & Note: This step will make trendchip's driver be loaded automatically when system startup. Create a new file named ifcfg-eth1 in /etc/sysconfig/networking/device/.
  • Page 21 IPADDR=192.168.1.2 NETWORK=192.168.1.0 BROADCAST=192.168.1.255 Note: This step will create a new Ethernet interface eth1 and configure this properties. Create or modify the file named resolv.conf in /etc/sysconfig/networking/profiles/default/. Add the following content: nameserver <ip of your primary DNS> nameserver <ip of your second DNS> Note: This step is configuring your DNS setting.

  • Page 22: Installing The Usb Driver In Mac Os X

    BOOTPROTO=none BROADCAST=192.168.1.255 IPADDR=192.168.1.2 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=no USERCTL=no PEERDNS=no GATEWAY=192.168.1.1 TYPE=Ethernet Reboot PC and then plug and power on your ADSL modem. 3.2 Installing the USB Driver in MAC OS X To install the MT882 USB Driver on a MAC OS X system, do as follows.
  • Page 23 Double-click the Installer to start the installation. Click Next to display the Authenticate page.
  • Page 24 Enter the name and password of the administrator, and click Read the information carefully and click Accept.
  • Page 25 Select a destination folder to install and click Next. Select Restart now and click Finish to restart your computer.

  • Page 26: Installing The Usb Driver In Windows Vista/Xp/2K

    3.3 Installing the USB Driver in Windows Vista/XP/2K 3.3.1 Installing the USB Driver in Windows System Automatically To install the USB driver on a Windows system automatically, do as follows: Connect the MT882 with your computer by using a USB cable.
  • Page 27 Select No, not this time and click Next to continue the installation.
  • Page 28 Put the CD-ROM provided with MT882 into your computer. Select Install the software automatically (Recommended) and click Next. The system searches the driver automatically.
  • Page 29 After the search completes, the system may display the following dialog box. Select the driver that matches the operating system of your PC from the list presented on this page.
  • Page 30 Click Next. The system installs the driver automatically.

  • Page 31: Installing The Usb Driver In Windows System Manually

    After the installation completes, the system will display the following dialog box. Click Finish to exit the Found New Hardware Wizard dialog box. 3.3.2 Installing the USB Driver in Windows System Manually To install the USB driver on a Windows system manually, do as follows: Connect the MT882 with your computer by using a USB cable.
  • Page 32 Click Cancel to exit the dialog box.
  • Page 33 Double-click Setup.exe on the CD-ROM provided with MT882 to display the Huawei USB ADSL Modem Installation dialog box.
  • Page 34 Click Next to continue the installation.
  • Page 35 Click Next. The system installs the driver automatically. After the installation completes, the system will exit the Huawei USB ADSL Modem Installation dialog box.

  • Page 36: Chapter 4 Service Configuration

    Chapter 4 Service Configuration This chapter introduces how to configure the MT882. Note: The figures in the following configuration operations are only for your reference. 4.1 Configuration Method 4.1.1 Protocol Model Figure 4-1 shows the protocol model for the connection between the MT882 and the DSLAM at the office end.

  • Page 37: Steps

    The data between the MT882 and the DSLAM are transmitted in the Asynchronous Transfer Mode (ATM). To configure the MT882 for different services, you need to configure the Permanent Virtual Channel (PVC) and other parameters. 4.1.2 Steps The steps to configure the service modes are as follows. Step To...

  • Page 38: Service Modes Of The Mt882

    4.2 Service Modes of the MT882 The MT882 supports multiple service modes. To choose a proper service mode, you need to take the DSLAM settings into consideration. Table 4-1 lists the available service modes. Table 4-1 Service modes of the MT882 Service Mode Working Method Configuration...
  • Page 39 Service Mode Working Method Configuration Take the MT882 as a router. The MT882 obtains an IP address from DHCP server Refer to 4.6 or uses the static public IP to "Configuring the RFC2684B access the Internet. RFC2684B Mode". RFC2684B encapsulation mode encapsulate the packets.

  • Page 40: Configuring The Pure Bridge Mode

    4.3 Configuring the Pure Bridge Mode In the pure bridge mode, the MT882 functions as a bridge. You need to install the PPP dial-up software in your computer to access the Internet. This section describes how to configure the MT882 to work in the pure bridge mode.

  • Page 41: Steps

    4.3.2 Steps You need to configure the MT882 and your computer in turn. Configuring the MT882 The steps are as follows: Log in to the Web setup page of the MT882. For details, see section 2.3 "Setting Up the Configuration Environment." Choose Basic >...

  • Page 42: Configuring The Pppoe Mode

    Click Create a new connection in the displayed page. Click Next in the New Connection Wizard dialog box. Choose Connect to the Internet and click Next. Choose Set up my connection manually and click Next. Choose Connect using a broadband connection that requires a username and password and click Next.

  • Page 43: Steps

    Item Configuration Active Default route Enable Enable VPI/VCI Provided by the ISP Encapsulation PPPoE Username and password for Provided by the ISP the PPPoE dial-up Service Name Specified by users Disabled DHCP mode of the MT882 Enable the DHCP server Note: After the DHCP server is enabled, the MT882 can assign a private IP address to the computer.

  • Page 44: Configuring The Pppoa Mode

    Choose Basic > WAN Setting in the navigation tree to display the WAN configuration page. Choose the PVC to be configured and click the editing icon. Select Routing in the PVC Mode field. Select PPPoE from the Encapsulation drop-down menu. Set the Active to Yes.

  • Page 45: Configuring The Rfc2684B Mode

    PPPoE, select PPPoE from the Encapsulation drop-down menu. For details, refer to 4.4 "Configuring the PPPoE Mode". 4.6 Configuring the RFC2684B Mode This section mainly introduces how to configure the MT882 in the RFC2684B mode and how to configure your computer to access the network through the MT882.

  • Page 46: Steps

    Name Configuration DHCP mode of the Enable the DHCP server MT882 4.6.2 Steps Configuring the MT882 The steps are as follows: Log in to the Web setup page. For details, see section 2.3 "Setting Up the Configuration Environment." Choose Basic > WAN Setting in the navigation tree to display the WAN configuration page.

  • Page 47: Configuring The Rfc2684(Ipoa) Mode

    II. Configuring Your Computer Configure the Ethernet card on your computer, so that your computer can automatically obtain such information as the IP address, gateway and DNS. 4.7 Configuring the RFC2684(IPoA) Mode It is similar to configure the RFC2684(IPoA) mode as to configure the RFC2684B mode.

  • Page 48: Chapter 5 Other Configurations

    Chapter 5 Other Configurations 5.1 TR069 Configuration Click TR069 of Advanced in the navigation bar to display the TR069 Configuration page. 5.1.1 Configuration Parameters Table 5-1 shows the parameter explanation of the TR069 Configuration page. Table 5-1 Parameters in the TR069 Configuration page Item Configuration URL: Enter the Internet address of...

  • Page 49: Save

    Item Configuration Periodic Inform: Select Activated to enable function periodical information. Select Deactivated to disable Periodic Inform the function. Interval: Enter the time interval of implementing periodical information. 5.1.2 Save Click Submit to save the settings. To save this configuration changes permanently, enter the Tools >...

  • Page 50: Changing The Administrator Password

    Note: You need to log in again to use the Web setup page after configuring the LAN IP address of the MT882. Ensure that the IP address of the computer and the IP address of the MT882 are in the same segment. 5.3 Changing the Administrator Password The Web manager of the MT882 provides the password protection function to prevent illegal users from changing the configuration of the...

  • Page 51: Firmware Upgrade

    Caution: When you restore the default settings, the customized data may be lost. There are two methods to restore default settings: Using the Reset Button The steps are as follows: Find the Reset button on the rear panel of the MT882. Use a pin to press the Reset button and then release it.
  • Page 52 Note: Please do not power off the device during the upgrade. The process will complete in a few minutes.

  • Page 53: Chapter 6 Troubleshooting

    Chapter 6 Troubleshooting 6.1 Fixing Common Problems Problem Solution Ensure that the power adapter matches the MT882. The Power indicator is not Ensure that the MT882 is connected to the power supply properly. Ensure that the Power button is pressed. Ensure that the ADSL line is connected properly.

  • Page 54: Faqs

    Problem Solution card. Note: "Network adapter" refers to a network interface card. In this context, it is the Ethernet card of your computer. Ensure that all the previous problems are addressed. Ensure that the PVC parameters provided by the ISP are not changed. Otherwise, restore the default settings.
  • Page 55 Architecture (ISA) bus with a 10/100M Ethernet card using the Peripheral Component Interconnect (PCI) bus. Install the latest driver. Find help on http://www.huawei.com. What should I do if the username and the password of the Web setup page are forgotten? If you forget the username and the password of the Web setup page, restore the default settings of the MT882.

  • Page 56: Chapter 7 Technical Specifications

    Chapter 7 Technical Specifications Main Technical Specifications ITU G.992.1 (G.dmt) Annex A ADSL standard ITU G.994.1 (G.hs) ANSI T1.413 Issue 2 Standard ITU G.992.3 (G.dmt.bis) Annex A ADSL2 standard ITU G.992.3 (G.dmt.bis) Annex M ITU G.992.5 Annex A ADSL2+ standard ITU G.992.5 Annex M The maximum downlink rate is G.dmt...
  • Page 57 Physical Features and Environment Requirements Power consumption < 5 W Power adapter output 12 V AC 0.8 A Temperature of the working 0℃–40℃ (32°F–104°F) environment Humidity of the working 5%–95% (non-condensing) environment Dimensions (L % W % H) 136 mm % 113 mm % 34 mm Weight <...

  • Page 58: Chapter 8 Appendix

    Chapter 8 Appendix 8.1 Default Settings 8.1.1 Common Default Parameters Item Default Value Username of administrator admin Password of administrator admin IP address 192.168.1.1 Subnet mask 255.255.255.0 DHCP mode Server Enable 8.1.2 Default PVC Parameters Sequence No. Mode Routing Routing Routing Routing Routing...

  • Page 59: Acronyms And Abbreviations

    8.2 Acronyms and Abbreviations ADSL Asymmetric Digital Subscriber Line Asynchronous Transfer Mode DHCP Dynamic Host Configuration Protocol Domain Name Server DSLAM Digital Subscriber Line Access Multiplex Internet Protocol IPoA Internet Protocol over ATM Industry Standard Architecture Internet Service Provider Local Area Network Personal Computer Peripheral Component Interconnect...
  • Page 60 Point-to-Point Protocol PPPoA PPP over ATM PPPoE PPP over Ethernet Permanent Virtual Channel Virtual Channel Identifier Virtual Path Identifier Wide Area Network...
  • Page 61 HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com No.: 103098...

Table of Contents