Samsung SNP-3120 User Manual page 79

INITIALIZE
Initialize
Main Menu
 Auto Refresh : Enables optimizing the sta-
tus of the camera's built-in electric circuits
and components on a regular basis.
(A regular operation can be scheduled.)
This mode can be used to maintain and
repair the current settings of the camera
when anomalous operations occur: e.g.
The camera happened to directly face a
light source, or the settings have been can-
celed after the camera repeatedly rotated
in all four directions for a long time to moni-
tor a specific location.
The default setting is Off.
- OFF, 1~7 Days : Selecting Off disables
Auto Refresh and selecting 1~7 Days
automatically executes it after 1~7 days
has passed.

M
Auto Refresh takes approximately 10 seconds
to finish. If Auto Refresh activates in the
middle of a sequence action, the camera
pauses the sequence action and performs an Auto Refresh, then resumes the sequence action
once the refresh is complete.
Initialize
Main Menu Main Menu
Camera Setting Camera Setting
P/T Setting P/T Setting
OSD Setting OSD Setting
Initialize Initialize
Initialize Initialize
Auto Refresh Auto Refresh OFF OFF
English _79