Samsung SNP-3302 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. iPolis SNP-3302
  6. User manual
Samsung SNP-3302 User Manual

Samsung SNP-3302 User Manual

Hide thumbs Also See for SNP-3302:
Table of Contents

Advertisement

Quick Links

NETWORK CAMERA

SNP-3302/3302H/

User Manual

3371/3371H/3371TH

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNP-3302

Summary of Contents for Samsung SNP-3302

  • Page 1: Network Camera

    NETWORK CAMERA SNP-3302/3302H/ User Manual 3371/3371H/3371TH...
  • Page 2 Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.

  • Page 3: Important Safety Instructions

    overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
  • Page 6 overview Please read the following recommend safety precautions carefully.  Do not place this apparatus on an uneven surface.  Do not place this apparatus near conductive material.  Do not attempt to service this apparatus yourself.  Do not install near any magnetic sources. ...

  • Page 7: Table Of Contents

    CONTENTS Important Safety Instructions OVERVIEW Product Features Recomended PC Specifications Recomended SD/SDHC Memory Card Specifications What’s Included At a Glance (SNP-3302/3371) At a Glance (SNP-3302H/3371H/ 3371TH) DIP Switch Setting (SNP-3302H/ INSTALLATION & 3371H/3371TH) CONNECTION Installation Inserting/Removing an SD Memory Card...

  • Page 8: Overview

    overview WEB VIEWER Connecting to the Camera Login Installing Silverlight Runtime Using the Live Screen Playback Playing the backup recordings Setup SETUP SCREEN Audio & Video Setup Network Setup Event Setup System Setup Specification APPENDIX Product Overview Troubleshooting Open Source Announcement GPL/LGPL Software License 8_ overview...

  • Page 9: Product Features

    PRODUCT FEATURES • 4CIF Video Quality • Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs.  However, MPEG-4 video can not be played on a web page. Use CMS software if you want to play the video on a web page.

  • Page 10: Recomended Sd/Sdhc Memory Card Specifications

    10Mbps and Class 6. WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name SNP-3302/3371, Camera SNP-3302H/ 3371H/3371TH User Manual, Installer S/W CD, CMS S/W DVD SNP-3302/3302H/...
  • Page 11 Appearance Item Name Quantity Description Model Name Used for installation on the wall Tapping Screw or ceiling SNP-3302/3371 Template Product installation guide Used for attaching the Hexagon screw installation base to the camera Used for fixing the installation SNP- L Wrench...

  • Page 12: At A Glance

    AT A GLANCE (SNP-3302/3371) Appearance Item Description Unlock button Used if installing the camera in the installation base. Dome Cover Dome cover for the lens and unit protection. Main unit Protect the internal PTZ mechanism from the direct sunlight.
  • Page 13 Bottom View of Installation Inner View of Installation Base Base 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 Protocol 2-1 OFF OFF OFF OFF Pelco-D OFF OFF OFF Pelco-P OFF OFF OFF OFF Panasonic OFF OFF...
  • Page 14 overview Item Description Audio Output Port Used to connect the audio output cable. Alarm I/O Port Used to connect the alarm I/O cable. Power Port Used to connect the power. Video Out Port Analog video output port. (for installation) 14_ overview...

  • Page 15: 3371Th

    AT A GLANCE (SNP-3302H/3371H/3371TH) Appearance Item Description Protects the internal PTZ mechanism from the direct sunlight, rain or Main unit external impact. Dome Cover Dome cover for the lens and unit protection. Safety cable hook Cable hook that is designed for preventing an accidental fall of the product. English _15...
  • Page 16 overview Bottom View of Installation Inner View of Installation Base Base Item Description Communications Set the transfer rate and protocols. Setup Switch ID Setup Switch Specify the camera ID. Communications Used for RS-485 communications. and AUX Ports Audio Input Port Used to connect the audio input cable.

  • Page 17: Installation & Connection

    installation & connection ❖ Camera Wiring Interface Board For the camera wiring, please refer to the picture below. Power Supply AC24V 2.5A Video Power Input Output Ground ETHERNET Alarm Alarm output Alarm Input Audio OUT Audio IN Communications and AUX TX- GND COM N.O Refer to Control Signal AUX Output...
  • Page 18 installation & connection Control Signal Connection • RS-485 Communications Camera Controller TXD+ TXD- • RS-422 Communications Camera Controller TXD+ TXD- RXD+ RXD-  The maximum power capacity of the alarm and AUX outputs is 30VDC/2A, 125VAC/0.5A, and 250VAC/0.25A.  When connecting alarm input and output cables, be sure to connect one cable to each terminal respectively.

  • Page 19: Dip Switch Setting

    DIP SWITCH SETTING (SNP-3302H/3371H/3371TH) How to set up Protocols and ID DIP Switches You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment.
  • Page 20 Transfer Method (RS-485/422) Settings Response Mode Settings RESERVED 10~11 Termination Settings RESERVED • Protocol Settings Select a communication protocol for the camera. Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4 SAMSUNG-T PELCO-D PELCO-P SAMSUNG-E Panasonic VICON Honeywell Reserved Reserved Reserved Reserved Reserved Reserved...
  • Page 21 • Baud Rate Settings Select the transfer speed of a selected communication protocol. Baud Rate (BPS) SW2-#5 SW2-#6 2400 4800 9600 19200 • Communication Method Settings Select a communication method for the camera. Function SW2-#7 Transfer Mode Switch RS-422(4Wire) RS-485(2Wire) •...

  • Page 22: Camera Id Chart

    installation & connection Camera ID DIP Switch Settings (SW1) To set up camera IDs, refer to the “Camera ID Chart” next. • Camera ID Chart SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 ON/OFF 22_ installation & connection...
  • Page 23 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English _23...
  • Page 24 installation & connection SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 24_ installation & connection...
  • Page 25 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English _25...
  • Page 26 installation & connection SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 26_ installation & connection...
  • Page 27 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English _27...
  • Page 28 installation & connection SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 28_ installation & connection...

  • Page 29: Installation

    AC 24V AC 22V ~ 26V 2.5 A  SNP-3302/3371 : If PoE+ and AC 24V are both applied, this camera will get supplied with power from PoE+.  SNP-3302H/3371H/3371TH If PoE+ and AC 24V are both applied in heater operation mode, the heater will be powered by AC 24V and the other devices will get supplied with power from PoE+.
  • Page 30 installation & connection Electrical Resistance of Copper Wire at [20°C (68°F)] Copper Wire Gauge (AWG) #24(0.22mm ) #22(0.33mm ) #20(0.52mm ) #18(0.83mm Resistance (Ω/m) 0.078 0.050 0.030 0.018 Drop Voltage (V/m) 0.028 0.018 0.011 0.06 Recommended Distance (m) Less than 20 Less than 30 Less than 30 Less than 30...

  • Page 31: 3371H/3371Th)

     Using the terminal for monitoring purposes may cause problems such as degradation in video quality. Preparing & Installing Camera Bracket (SNP-3302/3302H/3371/ 3371H/3371TH) For installation guidelines for brackets and housings, refer to the installation manual that is enclosed with the bracket or housing.
  • Page 32 installation & connection Installing by surface attachment  SNP-3302H/3371H/3371TH cannot be installed on the surface of a wall or ceiling. ❖ Attaching Template & Installing installation base 1. Attach the provided template on the ceiling. Based on the template, drill a 88mm hole in the ceiling and arrange the wires through the hole.
  • Page 33 ❖ Configuring Camera DIP Switches DIP switches for communication and ID protocols are located on the bottom of the camera. 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 Protocol 2-1 OFF OFF OFF OFF Pelco-D OFF OFF OFF Pelco-P...
  • Page 34 installation & connection - To attach or detach the camera, refer to the picture. • Attaching the Camera : Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”. •...

  • Page 35: Installing By Wall Mount

    Installing by wall mount ❖ Fix the installation base with the bracket 1. Fix the base with the bracket by turning it clockwise. 2. As shown in the picture below, gently press Knob and lift up the handle of the hinged door on the bottom of the installation base.
  • Page 36 installation & connection 4. Assemble Camera and Installation Base Assemble the installation base and camera by matching the installation direction guides. 5. Attach Camera Turn the camera frame counterclockwise until the protrusions on the camera frame and installation base become matched perfectly. 6.

  • Page 37: Optional Accessories For Installation

    Optional Accessories for Installation For your easier installation, you can purchase appropriate optional accessories available. 1. If installing the camera on the wall • Wall mount (SBP-300WM1) • Wall mount (SBP-300WM) 2. If installing the camera on the ceiling • Ceiling Mount (SBP-300CM) English _37...
  • Page 38 installation & connection 3. If installing the wall mount (SBP-300WM/SBP-300WM1) on an at least 80mm-long cylinder • Pole Mount (SBP-300PM) 4. If installing the wall mount (SBP-300WM/SBP-300WM1) on a corner of the wall • Corner Mount (SBP-300KM) 5. If installing on a building rooftop •...
  • Page 39 • Outdoor Housing (SHP-3700H) 7. If installing SNP-3302/3371 on a ceiling as built-in component • Flush-Mount Indoor Housing for PTZ Dome Camera (SHP-3700F) 8. If installing SNP-3302/3371 in the wall mount or ceiling mount • Hanging Mount (SBP-300HM1) English _39...

  • Page 40: Inserting/Removing An Sd Memory Card

    installation & connection INSERTING/REMOVING AN SD MEMORY CARD  Disconnect the power cable from the camera before inserting the SD memory card. Inserting an SD Memory Card 1. Using the screw driver, loosen 4 screws by turning them counterclockwise and separate the dome cover. 2.

  • Page 41: Memory Card Information (Not Included)

     Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released.  To remove the SD memory card, set <Record> to <Off> from <SD record> and press [Apply )]. (page 86) ...

  • Page 42: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2.

  • Page 43: To A Dhcp Based Dsl/Cable

    CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM INTERNET DSL/Cable External Remote PC Modem Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 44: Modem

    network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 45: Connecting The Camera To A Broadband Router With The Pppoe/Cable Modem

    CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband External Remote Cable Modem Cable Modem Router Camera DDNS Server (Data Center, KOREA) Local PC...

  • Page 46: Buttons Used In Ip Installer

    network connection and setup BUTTONS USED IN IP INSTALLER Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented.

  • Page 47: Static Ip Setup

    Exits the IP Installer program.  For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www. samsungipolis.com). STATIC IP SETUP Manual Network Setup Run <IP Installer_vX.XX.exe>...
  • Page 48 network connection and setup 3. In the <Address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually.  You can configure the static IP settings only if the DHCP checkbox is unchecked.

  • Page 49: Auto Network Setup

     The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user. 6.

  • Page 50: Dynamic Ip Setup

    network connection and setup 3. Enter the password. This is the login password for the “admin” user who accesses the camera. The default password is “4321”.  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

  • Page 51: Port Range Forward (Port Mapping) Setup

    PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1.
  • Page 52 network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. ...

  • Page 53: Connecting To The Camera From A Shared Local Pc

    CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. ...

  • Page 54: Web Viewer

    web viewer CONNECTING TO THE CAMERA Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...

  • Page 55: Login

    IP when you try to access the device. To add the IP address to the <DDNS> server, visit www.samsungipolis.com and register your device, and set the DDNS option to <Samsung DDNS> before providing the host name for the DDNS server.

  • Page 56: Installing Silverlight Runtime

    web viewer This network camera uses Microsoft Silverlight for displaying the video. INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer.
  • Page 57 5. When done, click <Close>. 6. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen.  For normal installation, set the Block Popup setting as follows: ex) Internet Explorer ...

  • Page 58: Using The Live Screen

    web viewer USING THE LIVE SCREEN Item Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the SD memory. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Auto Focus Fit the focus automatically.
  • Page 59 Item Description Hides the alarm indicator near the border of the viewer screen.  In the following cases, the alarm message will pop up on the border of the Hide the alarm viewer. indicator If an event (alarm, motion detection, video analysis) occurs If the camera is turned off If the network is disconnected Control the pan/tilt/zoom operations of the camera.

  • Page 60: To Capture The Snapshot

    web viewer • Exit Areazoom : Exit the Area Zoom mode. • Go to Preset : Move to the preset position. To capture the snapshot 1. Click [ ] on the scene to capture. The Capture dialog should appear. 2. Click [Save] button. The screenshot will be saved in the specified path.

  • Page 61: Playback

    To fit the full screen 1. Click the [Full Screen ( )] button. The corresponding button will be displayed in the Viewer. 2. Click the button. This will fit the Viewer to the full screen. 3. To exit the full screen mode, press [Esc] on the keyboard. To control the PTZ 1.
  • Page 62 web viewer 5. Select a data item to play in the search list. 6. Click the [Play ( )] button. 7. To stop playing the video, click [Stop To return to the search screen, click [Exit ( To check time information of the playing video 1.

  • Page 63: Playing The Backup Recordings

    PLAYING THE BACKUP RECORDINGS You can play backup recordings by using the SlimPlayer. To download SlimPlayer 1. Click [SlimPlayer ( You will see a download dialog where you can specify the download path. 2. Specify the path with a proper file name and click [Save].

  • Page 64: Setup Screen

    setup screen SETUP You can configure the audio & video, network, event and system settings of the camera via the network. 1. In the Live screen, click [Setup ( 2. The Setup screen appears. AUDIO & VIDEO SETUP Video profile 1.

  • Page 65: To Add A Video Profile

    To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select a profile number. 2. Provide the name and select a codec. 3.

  • Page 66: Video Setup

    setup screen What is GOP size? GOP (Group of Pictures) is a set of video frames for MPEG-4 and H.264 format compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data.

  • Page 67: Audio Setup

    Audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the <Audio & Video ( )> tab. 2. Click <Audio setup>. 3. Adjust the audio I/O levels to your preference.
  • Page 68 setup screen • [Adjust Focus ( )] : Adjusts the focus in the screen. • [Zoom Speed Control ( )] : The bigger the number is, the faster the zoom speed becomes. 5. Set the preset. To add a preset 1.
  • Page 69 2. Select a swing setting mode. • Pan swing : You can set the swing monitoring only using the PAN function. • Tilt swing : You can set the swing monitoring only using the Tilt function. • Pan & Tilt swing : You can set the swing monitoring only using both PAN and Tilt functions.
  • Page 70 setup screen To configure the tour settings The tour function enables you to call groups of your presets in sequence. 1. Set <Mode> in <Sequence setup> to <Tour>. The menu screen will switch to the tour setting screen. 2. Configure the tour settings in detail. •...
  • Page 71 To set the auto run This will perform the sequence operation that you have specified if no controller manipulation is made for a certain time. 1. Set <Mode> in <Sequence setup> to <Trace & Auto Run>. The menu screen will switch to the PTZ tracking and Auto execution menu screen.

  • Page 72: Camera Setup

    SSDR (Samsung Super Dynamic Range) Setup In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness.
  • Page 73 • AWC : Corrects the colors of the camera video to be optimized to the current lighting condition and screen mode. To obtain the optimal condition for the current lighting, put the focus of the camera to a white paper and press the [AWC Set] button. If the lighting environment is changed, you should readjust the settings accordingly.
  • Page 74 setup screen BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select <Backlight>. 2. Set <Mode> to <BLC>. 3. Select each item and set it properly. • BLC level : You can change the level to adjust the brightness of the monitoring area.
  • Page 75  At night operation, this function will be activated only if the incoming highlight exceeds a certain area in a low contrast environment.  At night, HLC will not function if the scene is either too bright or too dark. ...
  • Page 76 setup screen • Shutter mode : Adjust the electronic shutter of the camera. - ESC (Electronic shutter control) : Adjust the shutter speed automatically according to the ambient brightness. It is available only if the IRIS mode is set to MANUAL. - Manual : Adjust the shutter speed of the camera manually.
  • Page 77 • Day & night : You can switch the mode to adjust the black and white level as well as the colors. - Color : Always displays the video in colors. - B/W : Always displays the video in black and white. - Auto : Displays in color mode during normal daytime and switches to black and white mode in a low contrast scene at night.
  • Page 78 setup screen • Zoom tracking : Specify the focus sync mode with the zooming operation. - Off : Only the zoom lens will work. - Auto-Track : It will control (detect and correct) the zooming operation to keep fitting the focus. - Tracking : The zooming operation will be guided by the focus track.

  • Page 79: Network Setup

    NETWORK SETUP Interface 1. From the Setup menu, select the <Network ( )> tab. 2. Click <Interface>. 3. Set the <Interface> and <IPv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 80 The default is 80(TCP). • VNP port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554. • Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.

  • Page 81: Registering With Ddns

    - Password : Enter the password for the DDNS service. (i.e., password that is registered with Dyndns) 5. When done, click [Apply ( Registering with DDNS To register your product with the Samsung DDNS 1. Visit the iPOLiS web site(www. samsungipolis.com) and sign in with a registered account.
  • Page 82 7. Click [REGISTRATION]. The product will be added to the product list that you can check. To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set <DDNS> to <Samsung DDNS>. 2. Provide the <Host name> that you registered product domain with the DDNS site.
  • Page 83 IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <IP filtering>. 3. Select <Filtering type>. • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
  • Page 84 setup screen Installing the certificate 1. Enter the certificate name. 2. Select the certificate file to be installed and certificate key, and click [Install ( button. Deleting the certificate 1. Click [Delete ( )] button. 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification.

  • Page 85: Event Setup

    EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images stored in the camera to your PC if an event occurs. 1. From the Setup menu, select the <Event ( )> tab. 2.
  • Page 86 setup screen - Sender : Enter the address of the email sender. If the sender address is incorrect, the email from the sender may be classified as SPAM by the email server and thus may not be sent. - Subject : Enter a subject for your email. - Body : Provide the text for the massage.
  • Page 87 3. Specify the record conditions. • Record 1 fps forcibly : Only one frame per second will be recorded regardless of the existing record profile. • Overwrite : If the SD memory is full, this will delete old data and store new data in replacement.
  • Page 88 setup screen 5. Specify an operation that will perform if an alarm occurs. • Alarm output1 / Alarm output2 : Select whether to set the alarm output if an alarm is incoming, and specify the alarm output time. • E-mail sending : Specify the use of email transfer in the alarm input setup. •...
  • Page 89 To set the Intelligent Video Analysis 1. Select an Intelligent Video Analysis mode. 2. Set whether to use the Intelligent Video Analysis function. 3. Specify the event rules. 4. Set whether you want to use the overlay or not. - If you set it to <Enable>, the event rules will be shown on the screen.
  • Page 90 setup screen Two or more objects overlap or one object divides in multiple portions. Too fast object (for a proper detection, one object should be found overlapping between contiguous frames). Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.
  • Page 91 4. Select a desired <Defined Area Based Rules>. • Entering : An event where a moving object passes through the defined area and enters inside will be detected. • Exiting : An event where a moving object passes through the defined area and exits outside will be detected.

  • Page 92: Tracking Setup

    setup screen Tracking setup You can configure the tracking settings. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Tracking setup>. 3. Specify the <Tracking setup>. • Auto Track : Specify the use of auto tracking. •...

  • Page 93: Time Schedule

    6. Specify the <Mask Zone Setup>. You can specify a specific zone where a defined operation will be performed if an object under auto tracking enters the zone. • [ ] : Start your settings. • [ ] : Specify the start and end points. •...

  • Page 94: System Setup

    setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <Product information>. 3. Check the camera information, or provide details according to your network environment. • Device name : Provide a device name that will be displayed on the Live screen.
  • Page 95 • System time setup : Specify the time and date that will be applied to your system. - Manual : Specify the time manually. - Synchronize with NTP server : Sync with the time of the specified server address. - Synchronize with PC viewer : Synchronize the time with the connected PC. 4.
  • Page 96 setup screen Upgrade / Reboot 1. From the Setup menu, select the <System ( )> tab. 2. Click <Upgrade / Reboot>. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 97 To save the current settings and restore the backup settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”.
  • Page 98 setup screen You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • Syslog : You can check the system logs where any system changes are recorded including the time information.

  • Page 99: Appendix

    SPECIFICATION Description Items SNP-3302/3302H SNP-3371/3371H/3371TH Imaging Device 1/4" Vertical Double Density Interline Transfer CCD Total Pixels NTSC : 811(H) x 508(V), PAL : 795(H) x 596(V) Effective Pixels NTSC : 768(H) x 494(V), PAL : 752(H) x 582(V) Scanning System...
  • Page 100 Backlight Compensation Off / BLC / WDR / HLC Wide Dynamic Range 128X Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction SSNRIII (2D+3D Noise Filter) (Off / On) Digital Image Stabilization Off / On Operational...
  • Page 101 Appear/Disappearing Detection Operational Schedule Alarm I/O Input 4ea / Output 2ea (Relay) Remote Control Interface RS-485/422 SAMSUNG-T/E, PELCO-P/D, Panasonic, Honeywell, AD, RS-485 Protocol Vicon Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264, MPEG-4, MJPEG NTSC : 704x480, 640x480, 352x240, 320x240,...
  • Page 102 Description Items SNP-3302/3302H SNP-3371/3371H/3371TH Audio I/O Line in / Line out Audio Compression Format G.711 μ-law Audio Communication 2-Way IPv4, IPv6 TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, Protocol HTTPS, SSL, DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, ONVIF...
  • Page 103 Description Items SNP-3302/3302H SNP-3371/3371H/3371TH SNP-3302/3371 : -10°C ~ +50°C (+14°F ~ +122°F) / 20% ~ 80% RH Operating Temperature / Humidity SNP-3302H/3371H/3371TH : -50°C ~ +50°C Environmental (-58°F ~ +122°F) / ~ 90% RH Ingress Protection IP66 (SNP-3302H/3371H/3371TH only) Input Voltage 24V AC, PoE+ (IEEE802.3at)

  • Page 104: Product Overview

    PRODUCT OVERVIEW ❖ SNP-3302/3371 Unit : mm (inch) Ø155.0 104_ appendix...
  • Page 105 ❖ SNP-3302H/3371H/3371TH Ø248.0 Ø244 Ø148 Ø162 English _105...

  • Page 106: Troubleshooting

    appendix TROUBLESHOOTING PROBLEM SOLUTION Check to make sure that the camera’s Network settings are appropriate. Check to make sure that all network cables have been connected properly. If connected using DHCP, verify that the camera is able to acquire I can’t access the camera from a dynamic IP addresses without any problem.
  • Page 107 PROBLEM SOLUTION No JPEG file is transferred via Verify the settings in the following sequence: e-mail on occurrence of intelligent A. Check <Data & Time> settings. video analysis event of camera B. The <IV analysis function> should be set to <Enable>. even when the <IV analysis C.

  • Page 108: Open Source Announcement

    Its advanced feature-set (FastCGI, CGI, Auth, Output-Compression, URL-Rewriting and many more) make lighttpd the perfect webserver- software for every server that suffers load problems. For more additional information, send email to help.cctv@samsung.com. Copyright (C) 2004, Kneschke, incremental All rights reserved.
  • Page 109 Copyright (c) 1998-2001 University College London All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met : 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

  • Page 110: Gpl/Lgpl Software License

    GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 111 original authors' reputations. you receive it, in any medium, provided that you conspicuously and appropriately Finally, any free program is threatened publish on each copy an appropriate constantly by software patents. We wish copyright notice and disclaimer of to avoid the danger that redistributors of a warranty;...
  • Page 112 based on the Program is not required performing source distribution, a to print an announcement.) complete machinereadable copy of the corresponding source code, These requirements apply to the modified to be distributed under the terms work as a whole. If identifiable sections of Sections 1 and 2 above on a of that work are not derived from medium customarily used for software...
  • Page 113 However, parties who have received then the only way you could satisfy both copies, or rights, from you under this it and this License would be to refrain License will not have their licenses entirely from distribution of the Program. terminated so long as such parties If any portion of this section is held invalid remain in full compliance.

  • Page 114: End Of Terms And Conditions

    a version number of this License which TO IN WRITING WILL ANY applies to it and "any later version", you COPYRIGHT HOLDER, OR ANY have the option of following the terms and OTHER PARTY WHO MAY MODIFY conditions either of that version or of any AND/OR REDISTRIBUTE DAMAGES, later version published by the Free Software INCLUDING ANY GENERAL, SPECIAL,...
  • Page 115 WARRANTY ; without even the implied program is a subroutine library, you may warranty of MERCHANTABILITY or consider it more useful to permit linking FITNESS FOR A PARTICULAR PURPOSE. proprietary applications with the library. If See the GNU General Public License for this is what you want to do, use the GNU more details.
  • Page 116 or asking you to surrender the rights. development and use of software on Therefore, you have certain responsibilities general-purpose computers, but in those if you distribute copies of the software, or if that do, we wish to avoid the special danger you modify it: responsibilities to respect the that patents applied to a free program freedom of others.
  • Page 117 An interactive user interface displays performing those activities but which are not “Appropriate Legal Notices” to the extent part of the work. For example, Corresponding that it includes a convenient and prominently Source includes interface definition files visible feature that (1) displays an appropriate associated with source files for the work, copyright notice, and (2) tells the user that and the source code for shared libraries and...
  • Page 118 3. Protecting Users' Legal Rights From c) You must license the entire work, as a Anti-Circumvention Law. whole, under this License to anyone who comes into possession of a copy. This No covered work shall be deemed part of an License will therefore apply, along with effective technological measure under any any applicable section 7 additional terms,...
  • Page 119 model, to give anyone who possesses A “User Product” is either (1) a “consumer the object code either (1) a copy of the product”, which means any tangible personal Corresponding Source for all the software property which is normally used for personal, in the product that is covered by this family, or household purposes, or (2) anything License, on a durable physical medium...
  • Page 120 or installed by the recipient, or for the User works containing it; or Product in which it has been modified or c) Prohibiting misrepresentation of the origin installed. Access to a network may be of that material, or requiring that modified denied when the modification itself materially versions of such material be marked in and adversely affects the operation of the...
  • Page 121 or modify it is void, and will automatically from the original licensors, to run, modify terminate your rights under this License and propagate that work, subject to this (including any patent licenses granted under License. You are not responsible for enforcing the third paragraph of section 11).
  • Page 122 Each contributor grants you a non-exclusive, prohibits the exercise of, or is conditioned worldwide, royalty-free patent license under on the non-exercise of one or more of the the contributor's essential patent claims, to rights that are specifically granted under this make, use, sell, offer for sale, import and License.
  • Page 123 work, and to convey the resulting work. TO, THE IMPLIED WARRANTIES OF The terms of this License will continue to MERCHANTABILITY AND FITNESS FOR A apply to the part which is the covered work, PARTICULAR PURPOSE. THE ENTIRE RISK but the special requirements of the GNU AS TO THE QUALITY AND PERFORMANCE Affero General Public License, section 13, OF THE PROGRAM IS WITH YOU.
  • Page 124 USA Everyone is permitted to copy and we gave you. You must make sure that distribute verbatim copies of this license they, too, receive or can get the source document, but changing it is not allowed. code. If you link other code with the library, you must provide complete object files to [This is the first released version of the Lesser the recipients, so that they can relink them...
  • Page 125 Public License therefore permits such a “work that uses the library”. The former linking only if the entire combination fits contains code derived from the library, its criteria of freedom. The Lesser General whereas the latter must be combined with Public License permits more lax criteria for the library in order to run.
  • Page 126 is covered only if its contents constitute a well-defined independent of the application. work based on the Library (independent of Therefore, Subsection 2d requires that any the use of the Library in a tool for writing it). application-supplied function or table used Whether that is true depends on what the by this function must be optional: if the Library does and what the program that...
  • Page 127 it is irreversible for that copy, so the ordinary though the source code is not. Whether this GNU General Public License applies to all is true is especially significant if the work subsequent copies and derivative works can be linked without the Library, or if the made from that copy.
  • Page 128 1 and 2 above); and, if the work is either source or binary form) with the major an executable linked with the Library, components (compiler, kernel, and so with the complete machine readable “ on) of the operating system on which the work that uses the Library”, as object executable runs, unless that component code and/or source code, so that the...
  • Page 129 it. However, nothing else grants you is intended to apply, and the section permission to modify or distribute the as a whole is intended to apply in other Library or its derivative works. These circumstances. actions are prohibited by law if you do It is not the purpose of this section to not accept this License.

  • Page 130: How To Apply These Terms To Your New Libraries

    later version published by the Free Software PERMITTED ABOVE, BE LIABLE TO Foundation. If the Library does not specify YOU FOR DAMAGES, INCLUDING a license version number, you may choose ANY GENERAL, SPECIAL, any version ever published by the Free INCIDENTAL OR CONSEQUENTIAL Software Foundation.

  • Page 131: Openssl License

    WARRANTY; without even the implied use in the OpenSSL Toolkit. (http://www. warranty of MERCHANTABILITY or openssl.org/)” FITNESS FOR A PARTICULAR PURPOSE. 4. The names “OpenSSL Toolkit” and See the GNU Lesser General Public “OpenSSL Project” must not be used to License for more details.
  • Page 132 Original SSLeay License 4. If you include any Windows specific code (or a derivative thereof) from the apps Copyright (C) 1995-1998 Eric Young (eay@ directory (application code) you must cryptsoft. com) All rights reserved. This include an acknowledgement: “This package is an SSL implementation written product includes software written by Tim by Eric Young (eay@cryptsoft.
  • Page 133 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 134 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Snp-3302hSnp-3371hSnp-3371thSnp-3371

Table of Contents