Page 1: Network Camera
NETWORK CAMERA User Manual SNP-3120/3120V/3120VH...
Page 2 Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
Page 3: Important Safety Instructions
overview imporTAnT SAfeTy inSTruCTionS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
Page 4: Explanation Of Graphical Symbols
overview wArninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Page 5 when used outside of the u.S., it may be used HAr code with fittings of an approved agency is employed. CAuTion These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Page 6 overview Please read the following recommend safety precautions carefully. Do not Place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near. Do not attempt to service this apparatus yourself.
Page 7 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Page 8: Table Of Contents
Important Safety Instructions Product Features Recomended PC Specifications What’s Included At a Glance iNstallatioN & DIP Switch Setting CoNNeCtioN Installation (SNP-3120) Installing with accessories (Sold Separately) Installation (SNP-3120V) Installation (SNP-3120VH) Inserting/Removing an SD Memory Card Memory Card Information (Not Included)
Page 9: Web Viewer
web viewer Connecting to the Camera Login Installing Silverlight Runtime Using the Live Screen Playback Playing the backup recordings Camera setup Using the Camera Menu Camera Setting OSD Setting Initialize setup sCreeN Setup Audio & Video Setup Network Setup Event Setup System Setup appeNdix Specification...
Page 10: Product Features
overview proDuCT feATureS H.264/mpeG-4/mJpeG multi-Streaming  This network camera supports the H.264/MPEG-4/MJPEG codec and can display videos in different resolutions and qualities simultaneously with different Codecs. However, MPEG4 video can not be played on a web page. Use CMS software if you want to play the video on a web page.
Page 11 Item Name Quantity Description Model Name User Manual, Installer S/W DVD, CMS S/W DVD Quick Guide SNP-3120/3120V/ 7Pin Terminal Block For communications 3120VH 8Pin Terminal Block For alarm I/O Used to test the camera Cable for the testing connection to a portable display...
Page 12 Appearance Item Name Quantity Description Model Name Mount Bracket SNP-3120 Used to remove/fix the dome L Wrench SNP-3120V/3120VH cover The Test Monitor Cable is connected to a portable displayer and used for testing the camera. If you intend to use it for an actual monitoring camera, use the BNC cable instead.
Page 13 AT A GLAnCe Snp-3120 ❖ Item Description Main unit Main unit includes the lens, switch board, PCB boards and screws. Dome Cover Dome cover for the lens and unit protection. Audio Audio I/O port. Alarm In / Out Used to connect alarm in/out terminal block.
Page 14 overview Snp-3120v ❖ Item Description Surface Mount Used to install the camera directly on the ceiling. Bracket After separating this cover, mount this bracket on to ceiling. Main unit Main unit includes the lens, switch board, PCB boards and screws. Dome Cover Dome cover for the lens and unit protection.
Page 15 Snp-3120vH ❖ Item Description Sun Shield Housing Used to protect the main unit from the sunlight. Main unit Main unit includes the lens, switch board, PCB boards and screws. Dome Cover Dome cover for the lens and unit protection. SD Memory Card Compartment for the SD memory card.
Page 16: Camera Wiring Interface Board
overview Camera wiring interface Board ❖ For the camera wiring, please refer to the picture below. When using coaxial communication, a separate control signal connection is not required. ALARM VIDEO POWER PROTOCOL Controller & auxiliary signal Connection Name Usage 2.COM Alarm Output 2 (Common) 2.NO Alarm Output 2 (Normal Open)
Page 17 power, video & Communication signal Connection Name Usage VIDEO Video Output Ground 485+ Controller Data Line 485- Controller Data Line Field Ground AC 24V AC 24V The provided BNC cable’s blue line is Video Output, while the black line is the Ground. Power supply adaptor (AC) has no polarities.
Page 18: Dip Switch Setting
installation & connection Dip SwiTCH SeTTinG How to set up protocols and iD Dip Switches You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment.
Page 19: Protocol Settings
Protocol Settings Baud Rate Settings Response Mode Settings Termination Settings protocol settings  Select a communication protocol for the camera. Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4 AUTO DETECT Samsung-T Pelco-D Pelco-P Samsung-E Panasonic Vicon Honeywell BOSCH Reserved Reserved Reserved Reserved Reserved...
Page 20: Baud Rate Settings
installation & connection baud rate settings  Select the transfer speed of a selected communication protocol. Baud Rate (BPS) SW2-#5 SW2-#6 2,400 4,800 9,600 19,200 Communication response settings  Select a communication response method for the camera and controller: Response or No Response.
Page 21: Camera Id Dip Switch Settings
To use a third party controller with this product, please contact our After-Sales Service or Technology Department. Controls Using Different Protocols AD Protocol VICON Protocol GE Protocol Entering Camera OSD 3+Auxilary ON IRIS OPEN IRIS OPEN Exiting Camera OSD 3+Auxilary OFF IRIS CLOSE IRIS CLOSE ENTER...
Page 22: Camera Id Chart
installation & connection Camera id Chart  SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 ON/OFF 22_ installation & connection...
Page 23 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English _2...
Page 24 installation & connection SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 2_ installation & connection...
Page 25 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English _2...
Page 26 installation & connection SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 2_ installation & connection...
Page 27 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English _2...
Page 28: Installation (Snp-3120)
& connection inSTALLATion (Snp-3120) on-ceiling installation Drill a hole of 60mm diameter on the ceiling and run the wires down through it. Install the Mount Bracket onto the hold and fix it using 4 screws. Do not connect the camera to a power outlet until the installation is complete.
Page 29 Align the “Align The Arrow” triangular edge “A” Mount Bracket of the camera to the marking (shown as “A” in the diagram) on the left of the “fronT” side of the Mount Bracket. After inserting the camera into the Mount Bracket, turn the camera module clockwise about 25°.
Page 30 installation & connection flush mount Type installation example Attach the template, and then drill a hole according to the 143 mm diameter hole marked on the template. Drop down the camera cables through the hole. Drill another small hole for a screw to secure the camera. Rotate the dome cover counterclockwise to detach it from the camera.
Page 31 Connect each camera cable to the proper ter- minals on the bottom of the camera (Refer to Page 16: “Camera wiring interface Board”). Configure the DIP switches on the bottom of the camera for communication and ID (Refer to pages 19~21). Install Camera Fit the camera to the hole on the Ceiling ceiling, and then secure the camera using 3...
Page 32: Installing With Accessories
installation & connection inSTALLinG wiTH ACCeSSorieS (SoLD SepArATeLy) Turn the Dome Cover counter-clockwise and separate from the camera. Dome Cover Remove 3 screws and separate the Mount Housing from the camera. Mount Housing 2_ installation & connection...
Page 33 Fix the Mount Housing onto the Hanging Mount (SBP-300HM) with 4 screws (M4xL16). Hanging Mount Note that the recommended torque for the screw fastening is less than 3 kgf, to prevent deformation of the mount housing. Mount Housing Connect wires to the Terminal Block and attach it to the bot- tom side of the camera.
Page 34: Installation (Snp-3120V)
installation & connection inSTALLATion (Snp-3120v) Ceiling mount Use the provided L-shaped wrench to remove the surface mount by loosening 4 screws counter clockwise. Surface Body Screw Drill holes (5 mm in diameter and at least 35 mm in depth for each) for the screws (x4) to be inserted in the bottom of the surface mount, and insert the provided plastic anchor (HUD5) to the end.
Page 35 Connect the safety wire (attached to the camera) to the surface mount as shown. Then, arrange the cables. For more information about the wiring, refer to “Camera Wiring Interface Board”. (Page 16) Safety-wire Arrange the cables inside the surface mount so that they should not be entangled or stuck in, and align the guide rib of the camera with that of the surface mount.
Page 36 installation & connection mount onto the optimal adaptor Follow step 1 in “Ceiling mount” above and remove the surface mount. Insert the cables into the cable hole on the surface mount and fix them to SBP-300HM (HANGING MOUNT) using SCREW-MACHINE (BH, M4xL10, x4). Repeat step 3 through step 4 in “Ceiling mount”...
Page 37: Installation (Snp-3120Vh)
inSTALLATion (Snp-3120vH) Use the provided L-shaped wrench to loosen 4 screws counter clockwise, which will help removing the housing. Housing Main-frame Screw Screw Fix the housing to the NP 1.5" tapped pipe, wall mount (SBP-300WM) or ceiling mount (SBP-300CM) by turning it clockwise. For waterproofness and lock between the two component parts, use the Teflon tape to wrap them around.
Page 38 installation & connection Secure the safety wire (attached to the product) to the housing as shown. For details about the cable connection, refer to the “Camera Wiring Interface Board” section in this manual. Safety-wire Safety-wire Arrange the cables inside the housing lest they be damaged or stuck in, and use the L-shaped wrench to tighten 4 screws to the housing.
Page 39: Optional Accessories For Installation
Accessories for installation For your easier installation, you can purchase appropriate optional accessories available. When installing the camera on a wall SNP-3120, SNP-3120V :  Wall mount (SBP-300WM) + Hanging mount (SBP-300HM) SNP-3120VH :  Wall mount (SBP-300WM) When installing the camera on a ceiling SNP-3120, SNP-3120V : ...
Page 40 installation & connection When installing the Wall Mount (SBP-300WM) on a pole bigger than 80mm in diameter : Pole Mount (SBP-300PM) When installing the Wall Mount (SBP-300WM) on a cornered wall : Corner Mount (SBP-300KM) When installing SNP-3120VH on a rooftop of a building : Parapet Mount (SBP-300LM) 0_ installation &...
Page 41: Inserting/Removing An Sd Memory Card
inSerTinG/removinG An SD memory CArD inserting an SD memory Card Push the SD memory card in the direction of the arrow shown in the diagram. Do not insert the SD memory card while it’s upside down by force. Otherwise, it may damage the SD memory card.
Page 42: Memory Card Information
installation & connection memory CArD informATion (noT inCLuDeD) what is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports SDHC memory cards.
Page 43: Connecting With Other Device
ConneCTinG wiTH oTHer DeviCe Power Monitor Ethernet Connecting to the monitor Connect the video out port of the camera to the video input port of the monitor. In the initial installation of the camera, you can connect the camera to the monitor for checking the connection status.
Page 44: Connecting To Audio Input/Output
installation & connection Connecting to Audio input/output Microphone Microphone Speaker Speaker network Microphone Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker. Check the specifications for audio input.
Page 45 Alarm i/o wiring Diagram AUX COM AUX NO ALM1 COM ALM1 NO ALM1 NC ALM IN1 ALM IN2 Connecting to the i/o port box Connect the Alarm I/O signal to the corresponding port of the rear port box. 1 2 3 4 5 6 7 8 1 : 2.COM 5 : 1.NC 2 : 2.NO...
Page 46: Network Connection And Setup
network connection and setup You can set up the network settings according to your network configurations. ConneCTinG THe CAmerA DireCTLy To LoCAL AreA neTworKinG Connecting to the camera from a local pC in the LAn Launch an Internet browser on the local PC. Enter the IP address of the camera in the address bar of the browser.
Page 47: Connecting The Camera Directly
ConneCTinG THe CAmerA DireCTLy To A DHCp BASeD DSL/CABLe moDem INTERNET DSL/Cable Modem External Remote PC Camera DDNS Server (Data Center, KOREA) Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
Page 48: Modem
network connection and setup ConneCTinG THe CAmerA DireCTLy To A pppoe moDem INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
Page 49: Connecting The Camera To An Ip Router With The Pppoe/Cable Modem
ConneCTinG THe CAmerA To An ip rouTer wiTH THe pppoe/CABLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or IP Router Cable Modem External Remote Cable Modem Camera DDNS Server (Data Center, KOREA) Local PC...
Page 50: Buttons Used In Ip Installer
network connection and setup BuTTonS uSeD in ip inSTALLer Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Displays either <Static> or <Dynamic> for the current network connection Mode status.
Page 51: Static Ip Setup
Item Description DDNS URL address enabling access from the external Internet. However, this will be replaced with the <IP Address> of the camera if DDNS registration has failed. IPv4 Scans for cameras with the IPv4 setting. IPv6 Scans for cameras with the IPv6 setting. Scans for cameras that are currently connected to the network.
Page 52 network connection and setup In the <Address> pane, provide the necessary information. MAC (Ethernet) Address : The MAC  (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually. if using an ip router IP Address : Enter an address falling in ...
Page 53: Auto Network Setup
Click [oK]. Manual network setup will be completed. When the manual setup including IP is completed, the camera will restart. if the ip router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other. Category Camera #1 Camera #2...
Page 54: Dynamic Ip Setup
network connection and setup Enter the password. This is the login password for the “admin” user who accesses the camera. The default password is “4321”. Click [oK]. Auto network setup will be completed. DynAmiC ip SeTup Dynamic ip environment Setup Example of the Dynamic IP environment ...
Page 55: Port Range Forward (Port Mapping)
porT rAnGe forwArD (porT mAppinG) SeTup If you have installed an IP router with a camera connected, you must set the port range forwarding on the IP router so that a remote PC can access the camera in it. manual port range forwarding From the Setup menu of the IP router, select <Applications &...
Page 56 network connection and setup Setting up port range forward for several network cameras When several network camera connect to one IP router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera.
Page 57: Connecting To The Camera From A Shared Local Pc
ConneCTinG To THe CAmerA from A SHAreD LoCAL pC Run the IP Installer. It will scan for connected cameras and display a list of them. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera's IP address in the address bar of the Internet browser.
Page 58: Connecting To The Camera
web viewer ConneCTinG To THe CAmerA normally, you would Launch the Internet browser. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111 ...
Page 59 IP when you try to access the device. To add the IP address to the <DDnS> server, visit www.samsungipolis.com and register your device, and set the DDNS option to <Samsung DDnS> before providing the host name for the DDNS server.
Page 60: Installing Silverlight Runtime
web viewer This network camera uses Microsoft Silverlight for displaying the video. inSTALLinG SiLverLiGHT runTime If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer.
Page 61 When done, click <Close>. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen. For normal installation, set the Block Popup setting as follows: Internet Explorer  Tools  Block Popup ...
Page 62: Using The Live Screen
web viewer uSinG THe Live SCreen Item Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the SD memory. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Alarm Output Activate the Alarm Out port.
Page 63: To Capture The Snapshot
Item Description You can adjust the Pan/Tilt angle of the camera as well as the zoom factor. Digital PTZ You can use the mouse wheel to activate the digital zooming. Screen Adjust the screen to the optimal size, and display the Full Screen icon on the Live Optimization, screen.
Page 64 web viewer To toggle the audio sound Click the [Audio ( )] button. The corresponding button will be displayed in the Viewer. Click the button to listen to / mute the sound as you wish. This button operates as a toggle button. To toggle the microphone sound Click the [mic ( )] button.
Page 65 To activate a preset To perform the designated preset in the Live screen, right-click the mouse and select your desired preset number. pLAyBACK Click the [playback ( )] button. Specify the start time and end time of your search. Select a search type. Click the [Search ( )] button.
Page 66: Playing The Backup Recordings
web viewer To back up the searched video Click [ ] on the scene to back up. Save as window appears. Click [Save]. The screenshot will be backed up to the specified path. If you are using the IE8 as the default web browser, select “Tools-Internet Options- Security”...
Page 67: Camera Setting
camera setup uSinG THe CAmerA menu Follow the steps below if you run the Web Viewer for setting the menus. Launch the Web Viewer. Click [Camera menu ( )] in the left corner of the Live screen. The camera setup menu appears. Use the Up/Down (▲/▼) buttons to move to a desired item.
Page 68 camera setup Zoom/focus main menu  Camera Setting  Zoom/focus Focus Mode  Camera setting AUTO : Performs continuous auto-focus. Zoom/Focus MANUAL : Changes the camera mode to white balance atw(iN) Manual Focus. exposure back light ONESHOT : Auto-focuses the camera once after the Pan, Tilt, or Zoom medium function is used.
Page 69: White Balance
white Balance The White Balance menu adjusts the balance of the screen colors under different lighting conditions. main menu  Camera Setting  white Balance ATW(IN) : Adjusts the screen color to be  Camera setting optimal in an indoor environment. (Operating Temperature: about 2,500°K ~ Zoom/Focus white balance...
Page 70 camera setup exposure The Exposure settings are to control the camera’s exposure meter. main menu  Camera Setting  exposure Brightness : Adjusts the screen  Camera setting brightness. (Over 32: Brighter, Under 32: Darker) Zoom/Focus white balance atw(iN) It may not fully operable under extremely low exposure back light lighting condition.
Page 71: Back Light
Back Light backlight mode settings Unlike other cameras, Samsung Techwin’s unique A1 DSP chip gives you a clear image of the subject even with bright backlight. main menu  Camera Setting  Back Light Back Light  Camera setting OFF : Disables the Backlight mode.
Page 72 camera setup You can selectively choose a screen area to see objects within the area more clearly than others. main menu  Camera Setting  Back Light  BLC You can adjust the position and size of the  Camera setting backlight compensation area.
Page 73 Dnr (Dynamic noise reduction) DNR significantly reduces the amount of low luminance noise. main menu  Camera Setting  Dnr OFF : Disables the noise reduction func-  Camera setting tion. Zoom/Focus LOW : Reduces only a small amount of ...
Page 74 camera setup Day/night The Day & Night function allows the camera to switch between the Color and B/W modes. main menu  Camera Setting  Day/night Mode  Camera setting AUTO : Operates in Color mode most times, Zoom/Focus and switches to B/W mode if a low light level white balance atw(iN) is detected during nighttime.
Page 75: Image Hold
others main menu  Camera Setting  others Sharpness : Sharpens outlines of an  Camera setting image. Zoom/Focus Freeze : Stops or reanimates an image.  white balance atw(iN) Stabilizer : The Stabilizer compensates exposure  back light for any small movements of the camera caused by due to the wind and other medium reasonable causes.
Page 76: Jog Speed
camera setup Jog Speed You can adjust the pan/tilt speed of the controller in use. main menu  p/T Setting  Jog Speed MANUAL : The angle of the controller  p/t setting handle determines the speed of Pan and Tilt;...
Page 77: Osd Setting
oSD SeTTinG oSD Setting OSD Setting is to set up the OSD (On Screen Display) functions. main menu  oSD Setting Camera ID : Displays or hides Camera ID in  main menu the upper left of the screen. Camera setting Camera Name : Add a name to the cam- ...
Page 78 camera setup oSD Setting (others) main menu  oSD Setting  others Direction : Indicates the current angle of  osd setting the camera: East, West, South, North, Southeast, Southwest, Northeast, or Camera id Camera Name Northwest. seq. status Set North Dir. : Set up a North direction ptZ position language eNGlisH...
Page 79 iniTiALiZe initialize main menu  initialize Auto Refresh : Enables optimizing the sta-  main menu tus of the camera’s built-in electric circuits and components on a regular basis. Camera setting p/t setting (A regular operation can be scheduled.) osd setting This mode can be used to maintain and initialize repair the current settings of the camera...
Page 80: Setup
setup screen SeTup You can configure the audio & video, network, event and system settings of the camera in the network. In the Live screen, click [Setup ( The Setup screen appears. AuDio & viDeo SeTup video profile From the Setup menu, select the <Audio &...
Page 81: To Add A Video Profile
To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. Select a profile number. Provide the name and select a codec. Specify the conditions under which the codec will be applied. Specify the details of the selected codec including resolution and frame rate.
Page 82: Video Setup
setup screen video setup To set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. From the Setup menu, select the <Audio & video ( )> tab. Click <video setup>. Select a <pattern>...
Page 83: Ptz Setup
pTZ setup You can change the direction of lens and activate the zoom. Select the <Audio & video ( )> tab from Setup menu. Click <pTZ setup>. Click [Direction Adjustment ( [Change direction to (  )] : Change the direction of camera lens.
Page 84 setup screen to move a preset Select a preset number that you want to move. Press the [ ] button. to set the camera operation for the preset Select the number of preset that you want to configure. Press the [ ] button.
Page 85 When done, click [Apply ( to configure the swing settings Swing is a monitoring function that moves between two preset points and enables you to trace the motion. Set <mode> in <Sequence setup> to <Swing>. The menu screen will switch to the swing setting screen.
Page 86 setup screen Press the [ ] button. Your settings will be entered in the right list. Press the [ ] button. Selected group data will be deleted. to configure the tour settings The tour function enables you to call groups of your presets in sequence. Set <mode>...
Page 87 Press the [ ] button. Selected tracing number will be saved. Press the [ ] button. Selected tracing number will be activated as set. Press the [ ] button. Tracing will be stop. to set the auto run This will perform the sequence operation that you have specified if no controller manipulation is made for a certain time.
Page 88: Network Setup
setup screen pTZ limit You can specify restrictions on the pan or tilt function. From the Setup menu, select the <Audio & video ( )> tab. Click <pTZ limit>. Decide if you want to limit the PTZ operations. If so, specify the details. Pan / Tilt Limit : Select a mode to set ...
Page 89 The default is 80(TCP). VNP port : Set a port used to transfer video signals with the Samsung protocols.  RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
Page 90 setup screen Public DDNS : Select one of provided public DDNS servers when you use a public  DDNS server. Host name : Enter the name of the host (i.e., host name of Dyndns) that is registered with the DDNS server. User name : Enter the user name for the DDNS service.
Page 91: Registering With Ddns
Deleting the certificate Click [Delete ( )] button. registering with DDnS To register your product with the Samsung DDnS Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. From the top menu bar, select <DDnS ServiCe>-<my DDnS>.
Page 92 Click [reGiSTrATion]. The product will be added to the prod- uct list that you can check. To connect to the Samsung DDnS in camera setup From the DDNS setup page, set <DDnS> to <Samsung DDnS>. Provide the <Host name> that you registered product domain with the DDNS site.
Page 93: Event Setup
evenT SeTup fTp / e-mail You can configure the FTP/E-mail server settings so that you can transfer the images stored in the camera to your PC if an event occurs. From the Setup menu, select the <event ( )> tab. Click <fTp / e-mail>.
Page 94 setup screen Subject : Enter a subject for your email. Body : Provide the text for the massage. Attach the alarm images to the email that you are preparing. When done, click [Apply ( SD record You can set the record conditions or the use of recording for the SD memory, check the size of stored data, or format the SD memory itself.
Page 95 Pre-alarm duration : Specify the time point before the occurrence of the alarm;  starting from the time point, the images will be transferred. You can specify up to 5 seconds before the occurrence of the alarm. Post-alarm duration : Specify the time point after the occurrence of the alarm; to ...
Page 96: Video Analysis
setup screen video analysis From the Setup menu, select the <event ( )> tab. Click <video analysis>. Specify the use of Intelligent Video Analysis. Set the resolution value and sensitivity level to detect an object. Resolution Value Object Size 32 of 8x8 pixel 24 of 8x8 pixel 16 of 8x8 pixel 8 of 8x8 pixel...
Page 97: Time Schedule
Time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event. From the Setup menu, select the <event ( )> tab. Click <Time schedule>. To set the timer event Set <Timer event setup>...
Page 98: Date & Time
setup screen Memo : Provide an explanation about the camera for better understanding.  Language : Selects the language to display in the Web Viewer.  When done, click [Apply ( You should change the camera menu language in camera menu. Product related information only allows English for input.
Page 99 user From the Setup menu, select the <System ( )> tab. Click <user>. Provide the necessary user information. Administrator Password Change :  Change the current password for the administrator. Guest setup : If <Guest access> is  permitted, any guest can access the Web Viewer screen but can view only the Live viewer screen.
Page 100 setup screen To perform the upgrade Click [upgrade]. Click [Browse] and specify a file to upgrade. Click [Send]. The “upgrade” dialog appears where the progression will be shown in the bottom. If you forcibly terminate the upgrade process, upgrade will not be completed properly.
Page 101 You can check the system log or event log. From the Setup menu, select the <System ( )> tab. Click <Log>. Select a log type. Syslog : You can check the system  logs where any system changes are recorded including the time information. Evtlog : You can check the event logs ...
Page 102 SpeCifiCATion Description Items SNP-3120 SNP-3120V SNP-3120VH Imaging Device 1/4" Ex-view HAD PS CCD Total Pixels NT : 811(H) x 508(V), PAL : 795(H) x 596(V) Effective Pixels NT : 768(H) x 494(V), PAL : 752(H) x 582(V) Scanning System...
Page 103 Description Items SNP-3120 SNP-3120V SNP-3120VH Pan Range 360˚ Endless Pan Speed Preset : 650˚/sec, Manual : 0.05˚/sec ~120˚/sec (Turbo:200˚/sec) Tilt Range -5˚~185˚ Tilt Speed Preset : 650˚/sec, Manual : 0.05˚/sec ~120˚/sec Pan / Tilt / Rotate Rotate Range Preset 255 ea Preset Accuracy ±0.1˚...
Page 104 Moved / Fixed Analytics Schedule Alarm I/O Input 2ea / Output 2ea (Relay) Remote Control RS-485, CCVC (PELCO Coaxitron) Interface SAMSUNG T/E, PELCO-P/D, Panasonic, Honeywell, AD, Vicon, GE, RS-485 Protocol Bosch Ethernet RJ-45 (10/100BASE-T) Video Compression H.264, MPEG4, MJPEG Format...
Page 105 Description Items SNP-3120 SNP-3120V SNP-3120VH Video Quality H.264/MPEG4 : Compression Level, Target Bitrate Level Control Adjustment MJPEG : Quality Level Control H.264/MPEG4 : CBR or VBR Bitrate Control Method MJPEG : VBR Streaming Capability Multiple Streaming (Up to 10 Profiles)
Page 106 Description Items SNP-3120 SNP-3120V SNP-3120VH -10°C ~ +50°C Operating Temperature (+14°F ~ +122°F) -50°C ~ +50°C (-58°F ~ +122°F) / ~90% RH / Humidity Environmental /~90% RH Ingress Protection IP66 Input Voltage / Current 24V AC, hPoE(IEEE802.3at) Electrical Power Consumption Max.
Page 107: Product Overview
Snp-3120 SNP-3120 ❖ SNP-3120 (Max) (Max) Snp-3120v ❖ SNP-3120V SNP-3120V SAMSUNG SAMSUNG English _10 SNP-3120VH...
Page 108 Snp-3120vH ❖ SNP-3120VH SAMSUNG 10_ appendix...
Page 109: Troubleshooting
TrouBLeSHooTinG PROBLEM SOLUTION Check to make sure that the camera’s Network settings are appropriate.  Check to make sure that all network cables have been connected  properly. If connected using DHCP, verify that the camera is able to acquire ...
Page 110 appendix PROBLEM SOLUTION No JPEG file is transferred via Verify the settings in the following sequence:  e-mail on occurrence of intelligent A. Check <Data & Time> settings. video analysis event of camera B. The <IV analysis function> should be set to <Enable>. even when the <IV analysis C.
Page 111 Its advanced feature-set (FastCGI, CGI, Auth, Output-Compression, URL-Rewriting and many more) make lighttpd the perfect webserver- software for every server that suffers load problems. For more additional information, send email to help.cctv@samsung.com. Copyright (C) 2004, Kneschke, incremental All rights reserved.
Page 112 Copyright (c) 1998-2001 university College London All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met : 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 113: Gnu General Public License
GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
Page 114 original authors' reputations. you receive it, in any medium, provided that you conspicuously and appropriately Finally, any free program is threatened publish on each copy an appropriate constantly by software patents. We wish copyright notice and disclaimer of to avoid the danger that redistributors of a warranty;...
Page 115 based on the Program is not required performing source distribution, a to print an announcement.) complete machinereadable copy of the corresponding source code, These requirements apply to the modified to be distributed under the terms work as a whole. If identifiable sections of Sections 1 and 2 above on a of that work are not derived from medium customarily used for software...
Page 116 However, parties who have received then the only way you could satisfy both copies, or rights, from you under this it and this License would be to refrain License will not have their licenses entirely from distribution of the Program. terminated so long as such parties If any portion of this section is held invalid remain in full compliance.
Page 117: End Of Terms And Conditions
a version number of this License which TO IN WRITING WILL ANY applies to it and "any later version", you COPYRIGHT HOLDER, OR ANY have the option of following the terms and OTHER PARTY WHO MAY MODIFY conditions either of that version or of any AND/OR REDISTRIBUTE DAMAGES, later version published by the Free Software INCLUDING ANY GENERAL, SPECIAL,...
Page 118 WARRANTY ; without even the implied program is a subroutine library, you may warranty of MERCHANTABILITY or consider it more useful to permit linking FITNESS FOR A PARTICULAR PURPOSE. proprietary applications with the library. If this is what you want to do, use the Gnu See the GNU General Public License for Lesser General public License instead of more details.
Page 119 or asking you to surrender the rights. development and use of software on Therefore, you have certain responsibilities general-purpose computers, but in those if you distribute copies of the software, or if that do, we wish to avoid the special danger you modify it: responsibilities to respect the that patents applied to a free program freedom of others.
Page 120 An interactive user interface displays performing those activities but which are not “Appropriate Legal Notices” to the extent part of the work. For example, Corresponding that it includes a convenient and prominently Source includes interface definition files visible feature that (1) displays an appropriate associated with source files for the work, copyright notice, and (2) tells the user that and the source code for shared libraries and...
Page 121 3. protecting users' Legal rights from c) You must license the entire work, as a Anti-Circumvention Law. whole, under this License to anyone who comes into possession of a copy. This No covered work shall be deemed part of an License will therefore apply, along with effective technological measure under any any applicable section 7 additional terms,...
Page 122 model, to give anyone who possesses A “User Product” is either (1) a “consumer the object code either (1) a copy of the product”, which means any tangible personal Corresponding Source for all the software property which is normally used for personal, in the product that is covered by this family, or household purposes, or (2) anything License, on a durable physical medium...
Page 123 or installed by the recipient, or for the User works containing it; or Product in which it has been modified or c) Prohibiting misrepresentation of the origin installed. Access to a network may be of that material, or requiring that modified denied when the modification itself materially versions of such material be marked in and adversely affects the operation of the...
Page 124 or modify it is void, and will automatically from the original licensors, to run, modify terminate your rights under this License and propagate that work, subject to this (including any patent licenses granted under License. You are not responsible for enforcing the third paragraph of section 11).
Page 125 Each contributor grants you a non-exclusive, prohibits the exercise of, or is conditioned worldwide, royalty-free patent license under on the non-exercise of one or more of the the contributor's essential patent claims, to rights that are specifically granted under this make, use, sell, offer for sale, import and License.
Page 126 work, and to convey the resulting work. TO, THE IMPLIED WARRANTIES OF The terms of this License will continue to MERCHANTABILITY AND FITNESS FOR A apply to the part which is the covered work, PARTICULAR PURPOSE. THE ENTIRE RISK but the special requirements of the GNU AS TO THE QUALITY AND PERFORMANCE Affero General Public License, section 13, OF THE PROGRAM IS WITH YOU.
Page 127 USA Everyone is permitted to copy and we gave you. You must make sure that distribute verbatim copies of this license they, too, receive or can get the source document, but changing it is not allowed. code. If you link other code with the library, you must provide complete object files to [This is the first released version of the Lesser the recipients, so that they can relink them...
Page 128 Public License therefore permits such a “work that uses the library”. The former linking only if the entire combination fits contains code derived from the library, its criteria of freedom. The Lesser General whereas the latter must be combined with Public License permits more lax criteria for the library in order to run.
Page 129 is covered only if its contents constitute a well-defined independent of the application. work based on the Library (independent of Therefore, Subsection 2d requires that any the use of the Library in a tool for writing it). application-supplied function or table used Whether that is true depends on what the by this function must be optional: if the Library does and what the program that...
Page 130 it is irreversible for that copy, so the ordinary though the source code is not. Whether this GNU General Public License applies to all is true is especially significant if the work subsequent copies and derivative works can be linked without the Library, or if the made from that copy.
Page 131 1 and 2 above); and, if the work is either source or binary form) with the major an executable linked with the Library, components (compiler, kernel, and so with the complete machine readable “ on) of the operating system on which the work that uses the Library”, as object executable runs, unless that component code and/or source code, so that the...
Page 132 it. However, nothing else grants you is intended to apply, and the section permission to modify or distribute the as a whole is intended to apply in other Library or its derivative works. These circumstances. actions are prohibited by law if you do It is not the purpose of this section to not accept this License.
Page 133 later version published by the Free Software PERMITTED ABOVE, BE LIABLE TO Foundation. If the Library does not specify YOU FOR DAMAGES, INCLUDING a license version number, you may choose ANY GENERAL, SPECIAL, any version ever published by the Free INCIDENTAL OR CONSEQUENTIAL Software Foundation.
Page 134 WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to...
Page 135 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...

This manual is also suitable for:

Snp-3120v Snp-3120vh

Samsung SNP-3120 User Manual

Quick Links

NETWORK CAMERA

User Manual

Related Manuals for Samsung SNP-3120

Summary of Contents for Samsung SNP-3120

This manual is also suitable for:

Table of Contents