Important notice concerning power cord selection .........21 10.2.1 Compliance Information for the U.S.A............23 10.2.2 FCC Warning ..................23 10.2.3 CE Conformity for Europe...............23 10.2.4 EMC - Declaration Of Conformity ............24 Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
Page 4
“HIGH VOLTAGE EXISTS ON THE BACK LIGHT POWER LEAD OF THIS MONITOR. BEFORE SERVICING, DETERMINE THE PRESENCE OF HIGH VOLTAGE BY CONNECTING THE H.V. METER BETWEEN THE BACK LIGHT POWER LEAD AND CHASSIS ONLY.“ Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de classe B satisfait toutes les exigences des réglementations canadiennes inhérentes aux équipements générant des interférences. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
The product has been dropped or the cabinet has been damaged. The product exhibits a distinct change in performance, indicating a need for service. The power cord or plug is frayed or damaged. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
This monitor supports some special functions for video/audio application: PIP (Picture In Picture), VOV (Video On Video), 3D comb filter, de-interlace, overscan, auto impedance switch for looping video connection and looping audio connection. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
The LCD monitor comes with two video cables (D-sub 15-pin to DVI-I 29-PIN and DVI-D 24-pin to 24-pin) for computer video applications; one each for analog and digital signals. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
AV2 L (White) R-OUT AV1 R (Red) AV1 L (White) AV1 R (Red) AV2 R (Red) L-OUT AV2 R (Red) AV2 L (White) AV1 L (White) AV2 L (White) Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
Page 10
Connect the S-video (4-pin DIN) connector (labeled “S”) from the AV equipment to the monitor. Connect the red (R) and white (L) audio jacks from the AV equipment to the monitor. PC Audio line input DVI connector Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
If the LED indicator lamp is green, the unit is in normal operating mode. When DVI and PC input source applications are being used, the LED indicator lamp will change to orange when it is in power-saving mode. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products...
Press the “Menu/Exit” button once to exit the main menu. If the Menu/Exit button is not pressed, the monitor will automatically exit the adjusting screen after a preset time (in seconds). Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products...
VOLUME: This is used to adjust the sound volume. AUTO ADJUST (does not support DVI source) This is used for automatic configuration of the phase, clock, vertical and horizontal positioning of image. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
“OSD V-Position” is used to set up the vertical position of the OSD menu. “OSD Timeout” is used to set the timeout of the OSD Menu. There are seven options for the automatic timeout: 5, 10, 15, 20, 30, 45 and 60 seconds. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products...
The option “Memory Recall” returns the monitor to its factory default settings. NOTE: If there is no operation or automatic adjustment within the set time, the screen will be closed automatically. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
The option “RED” is used to increase the red color. The option “GREEN” is used to increase the green color. The option “BLUE” is used to increase the blue color. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products...
The option “Recall” returns the monitor to its factory default settings. NOTE: If there is no operation or automatic adjustment during the setting interval, the screen will be closed automatically. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
1. Make sure that both audio inputs are connected properly. but no sound is The audio input connectors have AV/ S-video/PC line in. audible 2. Check to see whether the volume is turned all the way down. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
Size of Conductors in Cord Maximum Current Rating of Unit 18 AWG 10 Amps 16 AWG 12 Amps 14 AWG 12 Amps 18 AWG 10 Amps 17 AWG 12 Amps Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
Page 22
BROWN must be connected to the terminal in the plug which is marked with the letter L or colored RED. If you have any questions concerning the proper power cord to use, please consult the dealer from whom you purchased the product. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
The device complies with the requirements of the ECC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety”. Siemens Building Technologies 1715 Monitor UG_EN.doc Fire & Security Products 06.2004...
Immunity : EN55024: 1998 Generic immunity standards. The following manufacturer/importer or authorized representative established within the EU is responsible for this declaration. Company name: Siemens Building Technologies Fire & Security Products GmbH & Co. oHG Address: D-76181 Karlsruhe Siemens Building Technologies 1715 Monitor UG_EN.doc...