Specifications - Cub Cadet Z-Force 54-KH Operator's Manual

Table of Contents

Advertisement

Specifications

NOTE: Specifications subject to change without notice.
Engine:
23HP Kohler Command
Type:
Vertical air cooled V-Twin
Air Cleaner:
Paper element and Foam Pre-cleaner
Lube System:
Pressurized with oil filter, drain valve with hose
Starter:
12-volt electric
Traction Drive:
Variable speed integrated hydraulic charged ZT-2800 pumps and wheel motors in each drive wheel
Cutter Deck Drive:
54" belt driven
Clutch:
Electric blade brake clutch
Deck Lift:
Foot Pedal with pin lock for height adjustment at 1⁄4" increments
Cutting Height:
1" to 4"
No. of Blades:
3, belt-driven, power take-off from engine
Controls:
Engine ignition and start switch; throttle; choke; left and right steering levers; electric blade clutch switch;
parking brake; mower deck lift
Parking Brake:
Mechanical linkage attached to the brake handle
Front Caster Wheels:
13 x 5.00 - 6
Tire Pressure:
8-10 psi rear, 20-25 psi front caster
Drive Wheels:
20 x 10.00-10
Frame:
Structural steel, all welded construction
Seat:
Adjustable seat. 4" Adjustment, w/ arm rests
Fuel Tank:
Two 5 gallons with individual shut-off valves
Ground Speed:
0-8 MPH forward & 0-4 MPH reverse
Instrumentation:
Hour meter
Net Weight:
759 lbs
* As rated by engine manufacturer
38
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z-force 54''

Table of Contents