Table of Contents
Advertisement
56
Settings
If Auto answer is set to On you
can answer a call by lifting the
handset off the base. If it's set
to Off, you'll need to lift the
handset off the base and then
press
. If Auto end is set to
On you can end a call by placing
the handset back in the base.
If Auto end is set to Off,
you'll need to press
end the call.
With Auto join calls set to
On you can automatically
join an existing call from
another registered handset
without being invited to join
the call, you can simply press
to join.
1666 BT4500 UG [5].indd 56
3. Press
Auto end call
and press
4. Press
Base settings
Set the base ringtone melody
Choose from 5 base ringtones. The default is Melody 1.
to
1. Select
press
2. Press
3.
Ringing
4.
Ringtone
display and listen to the melodies and press
to save your choice.
Set the base ringer volume
There are 5 base ringer volume levels plus Ringer
off. The default is Level 3.
1. Select
press
2. Press
3.
Ringing
4. Press
Press
or turn the ringer off. Press
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
or
to display either
,
Auto join calls
.
OK
or
to display
or
On
, scroll
to display
Menu
.
OK
to display
Base settings
is displayed, press
is displayed, press
, scroll
to display
Menu
.
OK
to display
Base settings
is displayed, press
to display
Ringing volume
to increase the volume or
OK
,
Auto answer
or
First ring
and press
to save.
Off
OK
and
Settings
and press
.
OK
.
OK
. Press
or
OK
OK
and
Settings
and press
.
OK
.
OK
and press
OK
to decrease
to save.
09/04/2013 15:04
to
.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BT4500 and is the answer not in the manual?
Questions and answers
How do I change the receiving welcoming message?
The BT4500 allows you to use one of two pre-recorded outgoing messages or record your own personal outgoing message. To change the receiving welcoming message, you need to record a new personal outgoing message or select one of the pre-recorded options from the answer machine settings.
This answer is automatically generated
I have had one of these sitting around for some time and decided to start using it. Have had it plugged in for 24 hours and all appears fine but when I call the number from my mobile it rings on the mobile but nothing happens on the BT 4500. when I take from the base it just shows Handset 1 and please check line cord. Does anyone have any idea what is wrong ?. would the batteries affect an icoming or outgoing call ? Thanks in advance
Possible reasons why the BT 4500 is not ringing or responding to incoming calls despite being plugged in for 24 hours include:
1. Power Supply Issues – Ensure the power supply is connected to a working socket.
2. Line Cord Connection – Verify that the line cord is properly connected to the telephone socket.
3. Battery Charge – The handset should be charged for 24 hours before first use.
4. Interference – Place the base unit away from large metal objects and electronic devices to avoid signal interference.
5. Answer Machine Settings – Check that the ring delay is set correctly to answer before any voicemail service like BT Answer 1571.
6. Faulty Equipment – If the issue persists, the phone may be faulty and may need repair or replacement.
If problems continue, contact the helpline for further assistance.
This answer is automatically generated