Page 2
ATTENTION! IMPORTANT INFORMATION Image quality of the object, which is being observed when an image intensifier is functioning, depends mainly upon operating characters of this image intensifier. Due to this fact black spots, which are inherent in the image intensifier, may be seen in the Read prior to activation field of view of a viewing device.
• connect the unit to external power sources 9. ACCEPTANCE CERTIFICATE ALWAYS • remove batteries when not in use for a long period NIGHT VISION DEVICE MB-3 ALWAYS • keep the objective lenses covered when not in use ALWAYS •...
Warning iii) Precautions 8. CUSTOMER SUPPORT 2. Components 3. Specifications Should you experience any difficulties with your Newcon OPTIK product, 4. Construction consult the enclosed manual. If the problem remains unresolved, contact our 5. Operating Instructions customer support department at (416) 663-6963.
Page 5
NEWCON product for warranty service are your responsibility. • Standard and commonly available AAA-batteries ensure operation of the Please include a cheques or money order made out to NEWCON OPTIK for the device of no less than 10 hours; amount of US$10.00 to cover shipping and handling.
Page 6
It is normal for the unit to flash within the first 2 minutes of activation. If the flashing continues afterwards the following is a possible cause: bright environment (even with the cap closed!) MB-3 is a precision optical instrument equipped with electronics. Therefore, it should be handled with due care. •...
2. COMPONENTS 5.3. Operation at night MB-3 is supplied with the following components: AT MOON LIGHT NAME QUANTITY MB-3 N.V Take off the lens cover (8). Turn on the device using switch (4). Turning the Carrying strap eye-piece focusing lever (3) adjust to achieve the most clear image on the Case screen.
4. CONSTRUCTION 5. OPERATION INSTRUCTIONS WARNING! 4, 5 NEVER OPERATE YOUR NIGHT VISION DEVICE IN DAYLIGHT AREAS WITHOUT THE LENS COVER ON! NEVER DIRECT THE LENS IN THE DIRECTION OF BRIGHT LIGHT! 5.1 Pre-starting procedures. 1. Unpack the device. In order to replace the batteries unscrew battery house cover (7) and replace the batteries observing the polarity indicated;...
Need help?
Do you have a question about the MB-3 and is the answer not in the manual?
Questions and answers