Table of Contents
Advertisement
Quick Links
NIGHTWITNESS NIGHT VISION MONOCULAR
In USA: 2331 Superior Ave. Cleveland, OH 44114
In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5
TABLE OF CONTENTS
Operation Manual
Unit Designation.......................................2
Components............................................3
Technical Specifications...........................4
Precautions...............................................7
Unit Stracture.........................................8
Indicators...................................................12
Operation Instructions........................14
Warranty...............................................22
Customer Support...................................24
Acceptance certificate.............................25
Advertisement
Table of Contents
Related Manuals for Newcon Optik NIGHT VISION MONOCULAR
Summary of Contents for Newcon Optik NIGHT VISION MONOCULAR
-
Page 1: Table Of Contents
Operation Manual NIGHTWITNESS NIGHT VISION MONOCULAR In USA: 2331 Superior Ave. Cleveland, OH 44114 In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 TABLE OF CONTENTS Unit Designation…...………...2 Components…...…...……..…...3 Technical Specifications…...4 Precautions…...……...7 Unit Stracture…...………………..…...8 Functions and Indicators...12 Operation Instructions.………...….…….14 Warranty…...…….………………...22 Customer Support…...24... -
Page 2: Components
LIGHTWEIGHT NV SYSTEM HIGH SENSITIVITY Compact lightweight night vision system Nightwitness is intended for low light observation & photo/video surveillance. This miniature monocular device is equipped with high gain, high resolu- tion Image Intensifier of II+SUPER or III Generation for selective performance. Nightwitness is the most versatile observation &... -
Page 3: Technical Specifications
TECHNICAL SPECIFICATIONS SPECIFICATIONS: Magnification: 5 ± 0,3 õ; 1,25 ± 0,1 õ Field of View : 5 õ 10,5° 1,25 õ 40° Focusing Range: 3 ì to Infinity IMAGE INTENSIFIER TUBE Type 18 ìì, Gen II+ Extra Definition. Photocathode sensitivity: integral 350 - 600 uA/lm 500 - 1600 uA/lm... -
Page 4: Precautions
TECHNICAL SPECIFICATIONS (CONT) Warning ! Warning ! Warning ! Warning ! Warning ! Image Intensifier possible defects table. Clarity of Image Intensifier tube is check against the table below: Í àèáî ëüøèé äèàì åòð òî ÷åê, ì ì FIELD OF VIEW CLEANNESS: CIRCULAR ZONE ZONE Í... -
Page 5: Unit Stracture
UNIT STRUCTURE Operation switches as well as the battery compartment and a place for wrist strap for NVD are located on the back surface of the unit . Moisture collector cartridge is located of the left side of the body of NVD. The standard tripod socket 1/4"... - Page 6 UNIT STRUCTURE (con’t) POWER SOURCE Power source for NVD is provided by one Ni-MH power cell voltage 1.2V (not less 2300 mAh) type «ÀÀ» or one Alkaline battery voltage 1.5V type «ÀÀ». This is enough for continued operation for up to 20 hours at 20°Ñ in observation mode and 6 hour of operation with IR illuminator turned on.
-
Page 7: Functions And Indicators
FUNCTIONS AND INDICATORS Tripod Thread 1/4" • Main body of Nightwiness • Desiccant FUNCTIONS AND INDICATORS • I/R illuminator Strap holder Battery House • Focusing Ring cover IR fixed security switch • Objective lens Power ON/OFF • switch Dioptrict adjustment ring •... -
Page 8: Operation Instructions
OPERATION INSTRUCTIONS Precautions Never disassemble the unit by yourself. There are no wires or modules that requires user to clean or modify. Operation procedures • Twist off the battery house cap. • Insert one battery type «ÀÀ» 1.5V, make sure that polarity is correct.. - Page 9 OPERATION INSTRUCTIONS (con’t) LOW BATTERY INDICATOR Low battery indicator is RED and is located in ocular field of view, the indicator will start to blink if voltage of the power supply is between 0.9 - 1.0 V, in this case the Green unit ON indicator is off. If the voltage is very low (less than 0.9V), all indicators of NVD will automatically turn off.
- Page 10 OPERATION INSTRUCTIONS (con’t)) Using the unit with external power supply of car adapter • Remove battery house cover. • Remove the battery «ÀÀ» and insert a external power adapt- er (optional). Lock the cap of an adapter into place. • Connect the power source to slot of external power supply cable( or car adapter ) with a standard low voltage plug type 5,5/ 2,1.
- Page 11 OPERATION INSTRUCTIONS (con’t) Environmental Conditions Nightwitness functions equally reliable in normal as well as extreme weather conditions. Although the unit performs reliably in harsh weather conditions and high moistures it is expected that user will do due diligence and pay more close attention to operation instructions, in order to keep unit in good working order and prevent early demise of the unit.
-
Page 12: Warranty
NEWCON Authorized Service. Postage, insurance, or shipping costs incurred in presenting your NEWCON product for warranty service are your responsibility. Please include a cheque or money order made out to NEWCON OPTIK for the amount of $15.00 to cover shipping and handling within North America... -
Page 13: Customer Support
CUSTOMER SUPPORT Should you experience any difficulties with your Newcon OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or Toll free at 1-877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, Eastern Standard Time.
Need help?
Do you have a question about the NIGHT VISION MONOCULAR and is the answer not in the manual?
Questions and answers