Related Manuals for Newcon Optik STARGATE M
Summary of Contents for Newcon Optik STARGATE M
- Page 1 OPERATION MANUAL NIGHT VISION MONOCULAR STARGATE M 105 Sparks Ave., Toronto, ON, M2H 2S5, Canada...
- Page 3 IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common Precautions that must be noted. NEVER expose the opened objective lens of an active unit in daylight.
-
Page 4: Table Of Contents
Table of contents Overview ............2 Delivery Set............5 Specifications ........... 6 Design............... 7 Operation Instructions ........8 Troubleshooting..........10 Warranty............12 Customer Support........... 12 Acceptance Certificate........15... -
Page 5: Overview
The unit utilizes an image intensifier tube, which amplifies available moonlight, starlight or artificial light. The Stargate M utilizes piezo crystals as a source of high voltage power for the image intensifier tube. The unit does not need any batteries to operate. An additional infrared illuminator is powered by a battery. - Page 6 Do not touch the optical surfaces with fingers. Doing so may damage the anti-reflection coating. Clean optical surfaces only with professional camera lens cleaning supplies. Clean the exterior of the device with a soft clean cloth. Do not take the cover off the lens if not necessary. ...
- Page 7 AP 12 infrared illuminator enables observation in complete darkness Stargate M is intended for use within the range of illumination from 5/1000 lux to 1 lux. High quality wide angle lens. The internal focusing mechanism provides a wide focusing range.
-
Page 8: Delivery Set
2. Delivery Set Stargate M is supplied with the following components: Quantity Stargate M AP 12 IR illuminator Neck strap Case Manual Warranty Registration Card... -
Page 9: Specifications
3. Specifications Magnification, x Field of view, degrees, min 20º 4 Dioptric compensation Focusing range, m 3- Lens focal length, mm Eyepiece focal length, mm Power Supply: needs no Monocular batteries IR illuminator CR 123 Environmental conditions: Operation temperature range -25ºC to +40ºC Relative humidity of no more than 80% at 20ºC... -
Page 10: Design
4. Design Figure 1. 1 - Housing 2 - Lens 3 - Eyepiece 4 - Lens Cover 5 - Activation lever 6 - Screw Cover 7 - Pressure Adjustment Screw 8 - Bushing 9- Infrared Illuminator 10 - IR illuminator battery house cover... -
Page 11: Operation Instructions
5. Operation Instructions Never operate your night vision device at daylight without the lens cover on. Never direct the lens towards bright light. 5.1. Operation Once in dark environment, take off the lens caps (4). Operation without the lens cover on is acceptable only at the illumination level below 1 lux. -
Page 12: Infrared Illuminator
Doing so repeatedly will damage to the activation mechanism. 5.3. Infrared illuminator When conditions are very dark, use the AP 12 infrared illuminator (9). Before usage, install a battery, observing the polarity. 5.4. Maintenance Maintenance includes only cleaning of parts if necessary. Clean the lens and eyepiece optical surfaces with a soft cloth dampened with “lens cleaner”... -
Page 13: Troubleshooting
6. Troubleshooting 6.1. The scope does not work. Push the lever all the way. Do not release it. 6.2. The image does not appear in focus. Bring the inspected object to the center of the image. Turning the eyepiece focusing lever (3) adjust to achieve the clearest image on the screen. - Page 14 6.5. Visibility decreases and / or disappears. Bright light sources (moon, projectors or headlights) may result in visibility degradation or even complete disappearance. If this happens move the scope away from the light source immediately. The image should be restored in within 2 minutes.
-
Page 15: Warranty
Acceptable defects, which may be seen in the field of viewing device, are given in the table below. Type of Zone Size of black spots, Number of black spots spots Central Up to 0.073 Not limited (circle of diameter From 0.073 to 0.150 5.5 mm) From 0.150 to 0.294 Immovable... -
Page 16: Customer Support
NEWCON product for warranty service are your responsibility. If shipping from North America, please, include a cheque or money order payable to NEWCON OPTIK for the amount of $15.00 to cover handling and return shipping. 8. Customer Support Should you experience any difficulties with your NEWCON OPTIK product, consult the enclosed manual. - Page 17 Newcon without following the instructions of our technical support department. NEWCON OPTIK accepts no responsibility for unauthorized returns. To locate NEWCON Authorized Dealer call: Tel: (416) 663-6963 Fax: (416) 663-9065 Email: newconsales@newcon-optik.com Web: www.newcon-optik.com The defective products should be shipped to: From the USA only: 2498 Superior Ave.
-
Page 18: Acceptance Certificate
9. Acceptance Certificate NIGHT VISION DEVICE Stargate M Serial number: _________________________________ Complies with all technical specifications and has passed the inspection. Date of production: _________________________________ Quality Inspector: __________________________________ Quality Assurance Seal... - Page 20 NEWCON OPTIK Printed in Canada...
Need help?
Do you have a question about the STARGATE M and is the answer not in the manual?
Questions and answers