Initial Setting - Sanyo PLV-80 Series Owner's Manual

Chapter 3 Basic Setting and Operation

Initial setting

After installing this product to the projector, perform the following basic
initial setting.
Click Initial Setting on the main menu to display the initial setting page.
There are two sub menus, Initial setting and Serial Port setting sub menu. Serial Port set-
ting page is used for controlling the external equipment through the serial port. For fur-
ther description of setting and operation, refer to chapter 5 "Use of Serial Port" (+p.63)
The model name of the projector on which this product is mounted is displayed on the
page.
Caution
!
Use of Battery
This product provides a lithium battery. When the battery runs down, the clock and timer functions
do not operate properly. Contact your local dealer for the replacement of battery. The replacement
must be carried out by a qualified service personnel.
0
Item Description
Language .............. Switches display language on the setting page.
English or Japanese.
Model name ....... Indicates the model name of the projector pro-
vided with the network unit
Network PIN code ........... Sets the Network PIN code to login the setting
page (+p.31)
PJLink ....................... Switches PJLink password authentication on or off
(+p.31)
Password ............... Password for PJLink function
Temperature ....... Switches display temperature unit Centigrade or
Fahrenheit