Name and function of each part
[1] Name and function of each part
(Top View)
POWER indicator
This lights up red when the network
function is set ON in the projector
menu.
Mounting screws
Mount by using a coin etc. (+ p.18)
ACT indicator
This turns on and off with green when
sending or receiving of data
LINk indicator
This lights up red when the network unit is
connected to the network correctly.
(Bottom View)
Connector plug
Connecting to the terminal on the pro-
jector. (+ p.18)
Power jack for Camera
Used to connect the camera power cable
(refer to separated owner's manual)
Serial port
Used to control the external equipment
via the network. (
p.63)
+
Video input jack for Camera
Used to connect the camera video cable
(refer to separated owner's manual)
LAN port
Connecting the LAN cable. (+ p.19)
1
PJ-NET ORGANIZER
OWNER'S MANUAL [PLV-80/75 Series]