N-Up Copying - Samsung SCX-812x Series User Manual

8. Press Start on the control panel to begin copying.
• If the original is larger than the printable area, some portions may
not be printed.
• If you do not press the Start button, only the front side will be
copied.
• If you press the Stop button, the machine cancels the copy job
and returns to ready mode.

N-up copying

The machine reduces the size of the original images and prints 2 - 9 pages
onto one sheet of paper.
• When you use this option Auto Fit, ID Copy, Booklet and Book
Copy in the Advanced tab are inactivated.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Press Advanced tab > N-Up from the display screen.
4. Press an option according to how many images to copy onto one page.
• Off: Copies an original onto one sheet of paper.
• 2Up - 9Up: Copies corresponding numbers of separate originals to
one page.
Depending on original document size, output paper size, and the
reduced rate of image, some options may be inactivated.
5. Select a tray in Paper source.
6. Press the appropriate page order.
• Depending on the options you select, the result will vary. Refer to the
below table before using the 2Up option.
Copying_ 57