Lenovo ThinkCentre M83z Maintenance Manual page 88

2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the cover is facing up.
3. Remove the computer stand. See "Removing and installing the computer stand" on page 73.
4. Remove the computer cover. See "Removing the computer cover" on page 76.
5. Remove the hard-disk-drive EMI shield. See "Removing and installing the hard-disk-drive EMI shield"
on page 77.
6. Disconnect the cable from the solid-state drive.
7. Remove the screw
remove it from the chassis.
Figure 15. Removing the hard-disk-drive bracket with the solid-state drive
8. Remove the three screws that secure the solid-state drive to the bracket, and then remove the
solid-state drive from the bracket. Do not touch the circuit board on the bottom of the solid-state drive.
Figure 16. Removing the solid-state drive from the bracket
82
ThinkCentre M83z Hardware Maintenance Manual
1 , and then pivot the hard-disk-drive bracket with the solid-state drive as shown to