Connection Settings - Nokia E5–00 User Manual

Show call duration — Display the
length of a call during the call.
Summary after call — Display the
length of a call after the call.
Speed dialling — Activate speed
dialling.
Anykey answer — Activate anykey
answer.
Noise cancellation — Activate
earpiece active noise cancellation.
Contact search — Activate contact
search in the home screen.
Network settings
Select Menu Ctrl. panel
>
and Phone > Network.
To select the network mode, select
Network mode
UMTS, or GSM. In dual mode, the device
switches automatically between
networks.
Tip: Selecting UMTS
transfer, but may increase the demand
on battery power and reduce the
battery life. In regions close to both GSM
and UMTS networks, selecting
mode may cause constant jumping
© 2010 Nokia. All rights reserved.
Settings
>
and Dual mode,
enables faster data
Dual
between the two networks, which also
increases the demand on battery
power.
To select the operator, select
selection and Manual
available networks, or
the device to select the network
automatically.
To set the device to indicate when it is
used in a microcellular network (MCN),
select Cell info display

Connection settings

Select Menu Ctrl. panel
>
and Connection.
Select from the following:
Bluetooth — Edit the Bluetooth
settings.
USB — Edit the data cable settings.
Destinations — Set up new or edit
existing access points. Some or all
access points may be preset for your
device by your service provider, and you
may not be able to create, edit, or
remove them.
VPN — Manage the settings for virtual
private networking.
Settings 159
Operator
to select from
Automatic to set
> On.
Settings
>