Downloading The Latest Diagnostic Utility; User Interface; Navigation; Survey Tab - HP xw4600 Service And Technical Reference Manual
Workstation
Hide thumbs
Also See for xw4600:
- Technical reference manual (181 pages) ,
- Specification (73 pages) ,
- Quickspecs (68 pages)
Table of Contents
Advertisement
To start the diagnostic utility on the Documentation Library CD:
1.
To enter the Computer Setup (F10) Utility, power on your workstation and press
initial boot process .
2.
Select your language from the list and press the
four headings are displayed: File, Storage, Security, and Advanced. There might be other
headings, depending on your workstation.
3.
Use the right arrow key to select Storage.
4.
Use the down arrow key to select Boot Order, and then press Enter.
5.
Select CD-ROM Drive, and then press
already enabled, pressing
6.
Set the optical drive at the top of the boot order. To do this, select CD-ROM, press the
and then use the up arrow to move it to the top of the boot order.
7.
To apply and save changes, press the
8.
Insert the Documentation Library CD into the workstation.
9.
Restart your system and HP Insight Diagnostics launches automatically.
Downloading the latest diagnostic utility
1.
Go to http://www.hp.com.
2.
Select the Support & Drivers link.
3.
Select the Download driver and software radio button.
4.
Enter your product number (for example, xw4600) in the text box, and then press Enter.
5.
Select your operating system.
6.
Select the Diagnostic link.
7.
Locate HP Insight Diagnostics Offline and select Download.
User Interface
Navigation
The Insight Diagnostics home page contains these tabs: Survey, Test, Status, Log, and Help. These
tabs separate the major functions of Insight Diagnostics.
Survey tab
When the Survey tab is selected, the Survey menu is displayed and enables you to view important
system configuration information. The Summary view limits the amount of data displayed, while the
Advanced view shows all the data in the selected category. Regardless of whether you choose
Advanced or Summary, the following categories of information are available on the Survey menu:
Overview—Provides a listing of general information about the computer.
All—Provides a listing of all information about the computer.
132 Chapter 5 System diagnostics and troubleshooting
Enter
F5
to enable it as a bootable device. (If the CD drive is not
F5
again disables it.) The default setting is Enabled.
F10
key, and then select File>Save Changes and Exit.
key. In the Computer Setup Utilities menu,
F10
during the
Enter
key,
ENWW
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
