5
2. Initial settings
Click on Start, and select Program, Renesas, Flash
Development Tool Kit 3.3, then Flash Development Tool Kit
3.3 Basic. The program will start up, and the window shown
below will open.
2.1 Selection of the device and kernel
Select H8S/2377F in the Select Device: box then click on
Next.
2.2 Selection of the port
Select the port to be used in the Select port: box then click
on Next.
5
6
2.3 Device setting
Enter 24.5760 in the Enter the CPU crystal frequency for
the selected device: box. Leave other settings as they are.
Click on Next.
2.4 Connection type
Click on the Use Default check box to remove the check
mark for this option. Select 19200 in the Recommended
Speeds: box.
DJM-800
6
7
7
8
A
B
C
D
E
F
139
8