Hands-Free Setup - Kenwood DNX7230BT Instruction Manual

Return to the Top page
Bluetooth Operation

Hands-Free Setup

You can perform various setup about
handsfree function.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Bluetooth].
Bluetooth SET-UP screen appears.
4
Touch [TEL SET-UP] in the Bluetooth
SET-UP screen.
Hands-free SETUP screen appears.
74 74
5
Set each item as follows.
Bluetooth HF/Audio
Select the speakers to output the sound from
cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
Front Only (Default): O utputs from the front
speakers.
All: Outputs from all speakers.
Auto Response*
1
Sets an automatic response time to pick-up an
incoming call.
OFF (Default): A utomatic response is not
available.
0-99: Set calling ring time (second).
Auto Pairing
When set to "ON", the Apple Auto Paring
function is turned on to automatically register
the iPod touch or iPhone connected to this
unit.
ON (Default): Uses Apple Auto Paring function.
OFF: Not uses Apple Auto Paring function.
SMS Receive Beep
Select whether to beep at an incoming SMS.
ON (Default): Beeps.
OFF: Not beeps.