Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for DeWalt D25313
Summary of Contents for DeWalt D25313
- Page 1 D25313 D25223 D25323 D25324 www.
- Page 2 Copyright D WALT...
- Page 3 Figure 1 D25323 D25223 D25313 D25324...
- Page 4 Figure 2 D25313, D25323, D25223 D25324 Figure 3 Figure 4...
- Page 5 Figure 5 Figure 6 Figure 7...
-
Page 6: Technical Data
EN GLI SH HEAVY-DUTY ROTARY HAMMERDRILL D25313, D25223, D25323, D25324 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. Technical Data... -
Page 7: Ec Declaration Of Conformity
It may be used for a preliminary assessment of exposure. WARNING: The declared vibration D25313, D25223,D25323, D25324 emission level represents the main applications of the tool. However if the WALT declares that these products described tool is used for different applications, under “technical data”... - Page 8 EN GLI SH 2) ELECTRICAL SAFETY Do not overreach. Keep proper footing and balance at all times. This Power tool plugs must match the outlet. enables better control of the power tool in Never modify the plug in any way. Do unexpected situations.
-
Page 9: Residual Risks
EN GL IS H 5) SERVICE • Never lay the tool down until the bit has come to a complete stop. Moving bits could Have your power tool serviced by a cause injury. qualified repair person using only identical replacement parts. This will ensure that the •... -
Page 10: Electrical Safety
EN GLI SH 1 Side handle For best vibration control, hold the tool with one hand on the main handle (m) and the other hand on 1 Depth adjustment rod the side handle (i). Apply just enough pressure so 1 Kitbox the hammer is approximately mid-stroke. -
Page 11: Assembly And Adjustments
Selecting the Operating Mode ® (fig. 2) Inserting and Removing SDS Plus Accessories (fig. 3) D25313, D25323, D25324 This tool uses SDS Plus ® accessories (refer to The tool can be used in the following operating the inset in figure 3 for a cross-section of an SDS... -
Page 12: Operation
EN GLI SH 3. Rotate the side handle to the desired position Replacing the Dust Cover (fig. 3) and tighten the handle. The dust cover (g) prevents dust ingress into the mechanism. Replace a worn dust cover immediately. Setting the Drilling Depth (fig. 5) 1. -
Page 13: Maintenance
EN GL IS H 2. To stop the tool, release the switch. Screwdriving (fig. 1) 3. To lock the tool in the off position, move the 1. Set the mode selector switch (d) to the rotary forward/reverse slider (c) to the central position. drilling position. -
Page 14: Motor Brushes
EN GLI SH • This machine is not user-serviceable. Take the Optional Accessories tool to an authorised D WALT repair agent after WARNING: Since accessories, other approximately 40 hours of use. If problems than those offered by D WALT, have occur before this time contact an authorised not been tested with this product, use WALT repair agent. - Page 15 EN GL IS H GUARANTEE WALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user.
- Page 16 Black & Decker - D WALT Tel: +32 (0)015 - 15 47 9211 België en Luxemburg Nieuwlandlaan 7, IZ Aarschot B156 Fax: +32 (0)015 - 15 47 9210 B-3200 Aarschot www.dewalt.be Danmark WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk...
Need help?
Do you have a question about the D25313 and is the answer not in the manual?
Questions and answers