English HEAVY-DUTY ROTARY HAMMERDRILL D25614 Congratulations! Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain You have chosen a D WALT tool. Years of experience, thorough the tool and the accessories, keep the hands warm (relevant...
English liquids, gases or dust. Power tools create sparks which For more information, please contact D WALT at the following address or refer to the back of the manual. may ignite the dust or fumes. c ) Keep children and bystanders away while operating The undersigned is responsible for compilation of the technical a power tool.
English g ) If devices are provided for the connection of dust Cutting accessory contacting a "live" wire may make exposed extraction and collection facilities, ensure these are metal parts of the power tool "live" and could give the operator connected and properly used.
English Markings on Tool WARNING: We recommend the use of a residual current device with a residual current rating of 30mA or less. The following pictograms are shown on the tool: Residual Risks Read instruction manual before use. The following risks are inherent to the use of rotary hammers: •...
English Active Vibration Control (AVC) System Anti-Rotation System For best vibration control, hold the tool as described in Proper In addition to the clutch, an anti-rotation system offers increased Hand Position and apply just enough pressure so the damping user comfort through an on-board, anti-rotation technology capable of detecting if the user loses control of the hammer.
English Operation Modes (Fig. A) 2. Slide the assembly onto the nose of the tool, through the steel ring 14 and onto the collar 2 , past the chisel holder WARNING: Do not select the operating mode when the and sleeve. tool is running. 3.
English Drilling with a Core Bit (Fig. A, B) WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power 1. Insert the appropriate core bit. source before making any adjustments or removing/ 2. Assemble the centerdrill into the core bit. installing attachments or accessories.