Advertisement
Table of Contents
- 1 Assembling Blade Tilting Handwheel
- 2 Assembling Motor Pulley/Belt/Pulley Guard/Drive Belt
- 3 Connecting Motor Cord to Switch Assembly
- 4 Assembling Blade Guard/Splitter
- 5 Assembling Extension Wings
- 6 Assembling Guide Rails & Switch Assembly
- 7 Assembling Rip Fence to Guide Rails
- 8 Connecting to Power Source
- 9 Operating Controls & Adjustments
- 10 Backlash Adjustments for Blade Raising/Tilting Mechanisms
- 11 Miter Gage Operation & Adjustment
- 12 Adjusting Table Insert
- 13 Changing Saw Blade
- Download this manual
Advertisement
Table of Contents
Related Manuals for Delta 34-444
Summary of Contents for Delta 34-444
- Page 26 • PORTER-CABLE DELTA SERVICE CENTERS • (CENTROS DE SERVICIO DE PORTER-CABLE DELTA) • Parts and Repair Service for Porter-Cable Delta Machinery are Available at These Locations • (Obtenga Refaccion de Partes o Servicio para su Herramienta en los Siguientes Centros de Porter-Cable Delta) Cleveland 44125 ARIZONA...
Need help?
Do you have a question about the 34-444 and is the answer not in the manual?
Questions and answers
How do I adjust the Blade to the Miter Slot. My blade is about 1/16th out of allignment
To adjust the Delta 34-444 table saw blade to the miter slot:
1. Loosen the Table Bolts: The blade assembly is attached to the table, so you need to loosen the bolts securing the table to the base.
2. Measure Blade Alignment: Use a precise measuring tool to check the distance between a specific tooth on the blade and the miter slot at both the front and back positions.
3. Adjust the Table: Tap the table gently with a dead blow hammer to make small adjustments.
4. Retighten Bolts: Once the blade is aligned with the miter slot, securely tighten the table bolts.
5. Recheck Alignment: After tightening, remeasure to ensure the alignment remains correct.
This method ensures the blade is parallel to the miter slot for accurate cuts.
This answer is automatically generated