Table of Contents
Advertisement
I System Function
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Enter the desired function number.
3. Press the CAM FUNC/SYS FUNC button while holding
down the SHIFT button. The system function of
recorder will be executed.
Notes:
• Refer to the operating instructions of recorder for
details on available functions and function numbers.
• If you have entered 4 digits or more, last 3 digits are
available.
I Other Functions
G Displaying WJ-HD300A Series
SETUP MENU
To display WJ-HD300A Series SETUP MENU, follow the
procedure below.
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the MENU button repeatedly until "System Setup"
appears on the LCD.
HD300 Setup
On 5Off
3. Press the F1 button.
HD300 Setup
5On
Off
300
6. To end the setting and return to the normal view, press
300
WJ-HD300A Series SETUP MENU will appear on the
active monitor, and "B" mark will light up beside "On".
The following functions and buttons are valid in SETUP
MENU.
<Main unit>
JogDial clockwise: Increments a parameter.
JogDial counterclockwise: Decrements a parameter.
CAM (SET) button: Executes the selections and dis-
plays a submenu.
+ button: Increments a parameter.
– button: Decrements a parameter.
MON (ESC) button: Returns to SETUP MENU or the
previous menu.
<3D joystick unit>
3D joystick upward (D): Moves the cursor up.
3D joystick downward (C): Moves the cursor down.
3D joystick to the left (A): Moves the cursor to the left.
3D joystick to the right (B): Moves the cursor to the
right.
CLEAR button: Deletes a character when editing a
camera title, user ID, or password, etc.
the F2 button when SETUP MENU is displayed. "B"
mark will disappear from the LCD.
75
Advertisement
Table of Contents
