Table of Contents
Advertisement
Main Features
I Operator Functions
G Operator Area Changes
The system can be divided into multiple areas (up to 64),
and an operator can change from one area to another if
they have the necessary permission.
G Operator Log On and Off
Operators are assigned a user ID and password by a sys-
tem administrator. A user ID and password are required for
any operator to log on to the system. System administrators
can specify to automatically log operators off if there is no
activity for a pre-defined time period.
G Operator Class
The system allows administrators to define operator classes
with up to 25 different privileges, and then assign each
operator to one of the defined classes. The privileges are:
permission override, area change, alarm select, all alarm
reset, alarm acknowledge and reset, all alarm arm and dis-
arm, alarm arm and disarm, camera select, camera posi-
tion, camera preset programming, camera menu on and
off, camera function enable (not currently supported), cam-
era receiver, camera setup data, camera lock, camera lock
override, tour sequence, all sequence stop (not currently
supported), sequence controller programming, monitor
select, monitor lock, on-screen display on and off, time and
date on and off, digital disk recorder select, digital disk
recorder control.
G Operator Priority
The system administrator can assign a priority to each
operator. When two operators compete for system
resources, only the operator with the higher priority gets the
resources.
I Video Switch and Video
Routing
This function allows operators to switch video from one
video source to another, if the permission is granted. For
multiple operators competing for the same resource, it only
allows the highest priority operator to perform this function.
The next highest priority operator gains control when the
highest priority operator releases the resource.
14
I Video Camera Functions
G Camera Control
The system provides operators with the camera control
functions. The supported functions are: pan, tilt, zoom,
focus, and iris.
G Camera Operation
The system provides operators with the following camera
operation functions:
• Camera menu control
• Camera preset call and programming
• Camera receiver control
I Video Recorder Functions
G Recorder Basic Operations
The system provides operators with the following video
recorder functions:
• Recording
• Playback, pause, and stop
• Fast-forward and rewind playback at different speeds
• Video input channel selection
• Multiscreen segment switching
G Recorder Search Functions
The system provides operators with the following recorder
search functions:
• Date-and-time search playback
• Recording event search (Thumbnail or list search)
• VMD search (Video motion detection search)
G Recorder Menu Functions
The system provides operators with the following recorder
menu functions:
• Recorder setup menu
• Disk selection menu
• A – B repeat playback menu
• Filter cancellation menu
G Recorder Instant Playback Operation
The system provides operators with the instant playback
operation for a selected global camera.
Advertisement
Table of Contents
