Monitor Selection and Camera Selection
After the login procedure, the following operations are avail-
able to control the system.
The operation begins with monitor selection. Then, the
image of selected camera appears on the active monitor.
I Monitor Selection
1. Select the desired monitor number by pressing the
numeric buttons. The entered number will appear on
the LCD.
MON
2. Press the MON (ESC) button.
When the selected monitor number is correct, <" is dis-
played.
MON
0123<Unit:01
Note: To select the next or previous monitor number, press
the + or – button.
I Camera Selection
1. Select the desired camera number by pressing the
numeric buttons. The entered number will appear on
the LCD.
MON 512
0123<Unit:01
2. Press the CAM (SET) button.
When the selected camera number is correct, >" is dis-
played.
MON
0123 Unit:01
Note: To select the next or previous camera number, press
the + or – button.
56
123
CAM
Unit:01
CAM
CAM
CAM
>00512
I Monitor Lock
Monitor lock is the function to retain other operators' control
of a monitor even after that operator has selected another
monitor.
Note: This function will prevent operators with a lower prior-
ity from gaining control of a monitor. However, opera-
tors with a higher or the equal priority can gain the con-
trol of monitor.
1. Select a desired monitor. (Refer to Monitor Selection.)
2. Press the MON LOCK/LOGOUT button. The monitor
lock mode is activated, the monitor number with "L"
sign is displayed on the active monitor, and "L" will
appear beside "MON" on the LCD.
LMON
0123 Unit:01
Note: Every time you press the MON LOCK/LOGOUT
button, the monitor lock mode will be activated or
deactivated.
CAM
00512