Digital Connectrons - Kenwood VR-605 Instruction Manual

Setting up the system
Digital connections
The dIgItal I" lacks can accept DTS, Dolby Dlgltal. or PCM signals. Connect components capable of outputting DTS, Dolby Digital. or standard PCM (CD)
format dIgital signals
If you have connected any dIgItal components fo the receiver, be sure to read the "Input mode settings" section carefully -a
\
WAD;EL DIGITAL OUT
Component with DTS,
- Dolby Digital, or PCM
COAXIAL DIGITAL OUT
demodulator
Connect the video slgnal and analog
audio signals to the VIDEO 2 jacks.
(See "Connectlngvldeocomponents".)
-m
LD player
Optlcal fiber cable
OPTICAL DIGITAL OUT (AUDIO)
ao-- -0
CD or DVD player
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See "Connecting video components".)
IlEN