Hitachi CP-S830W/E Operating Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-S830W/E
  6. Operating manual
Hitachi CP-S830W/E Operating Manual

Hitachi CP-S830W/E Operating Manual

Liquid crystal projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Liquid Crystal Projector
Model name
CP-S830W/E

OPERATING GUIDE

Thank you very much for purchasing this Hitachi Liquid Crystal Projector.
Please read this operating guide to use correctly. After reading this manual, keep it carefully for
future reference.
Outline
This Liquid Crystal Projector can display various
computer signals and NTSC/PAL/SECAM video
signals.
Features
(1) High brightness
A highly efficient optical system with a UHB lamp ensures
high brightness.
(2) High resolution
Three separate high-definition liquid crystal panels are
used for the R, G and B signals.
(3) Compact size, light weight for portability
(4) RGB output terminal
(5) RS232C Communication
(6) Mouse emulation
(7) Complies with VESA DDC1/2B specifications
Contents
Before use ............................3
part ................................7
Installation ..........................11
Basic operations ..................12
terminals ......................18
terminal........................18
signal terminal ............21
Lamp ..................................28
Message table ....................29
wrong ..........................30
Specifications ......................31
Page

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-S830W/E

Summary of Contents for Hitachi CP-S830W/E

  • Page 1: Table Of Contents

    Liquid Crystal Projector Model name CP-S830W/E OPERATING GUIDE Thank you very much for purchasing this Hitachi Liquid Crystal Projector. Please read this operating guide to use correctly. After reading this manual, keep it carefully for future reference. Outline This Liquid Crystal Projector can display various computer signals and NTSC/PAL/SECAM video signals.
  • Page 2 FOR THE CUSTOMERS IN U.K THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K PLEASE REFER TO THE NOTES ON THIS PAGE. WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.

  • Page 3: Before Use

    WARNING:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications, Operation of this equipment in a residential area is likely to cause harmful interference in which case...

  • Page 4: Safety Precaution

    (Safety precaution) If any abnormality occurs. · When there is an abnormal smell or smoke, if you use this unit as it is, this could cause a fire or electric shock, etc. When an abnormality is found, immediately turn off the power switch and pull out the power plug from the power outlet.
  • Page 5 Be careful in handling the power cord. · Do not scratch, damage or process the power cord. Do not bend it forcibly. Also do not put a heavy object on it, do not heat it and do not pull it. If you do, the power cord may be damaged and it may cause a fire, electric shock, etc.
  • Page 6 Pull out the power plug but, in rare cases, the reflector and the inside from the of the projector may be damaged by scattered power broken pieces of glass, and broken pieces outlet. could cause injury when being handled ·...

  • Page 7: Names And Functions Of Each Part

    RGB2 VIDEO1 VIDEO2 TEMP indicator This lights or blinks when temperature inside the projector is too high or when fan is abnormal.(See page 30) ON indicator This blinks in the standby mode and lights in the operation mode.(See page 30)
  • Page 8 Names and functions of each part (continued) AC IN socket Connect the provided power cord. VIDEO input terminal (on video-equipped models only) S-VIDEO input terminal Mini DIN 4pin connector(1/2) VIDEO input terminal RCA Jack(1/2) AUDIO L/R input terminal RCA Jack(1/2) Remote control sensor MAIN POWER switch Main power ON/OFF switch.

  • Page 9: Remote Control Transmitter

    Names and functions of each part (continued) Remote control transmitter STANDBY / ON button Power ON/OFF button. OFF sets the unit in standby mode. (See page 12, 13) BRIGHT button Adjusts bright. (See page 15) TIMER ON / OFF button Displays the setting time by count down.
  • Page 10 Names and functions of each part (continued) How to insert batteries Insert the provided batteries (AA or R6P) into the remote control transmitter. Remove the battery compartment cover. Slide the battery compartment cover in the direction of the arrow while pressing slightly down on it.

  • Page 11: Installation

    2. Adjust the projection angle, release the button of the adjuster and securely lock it. 3. To adjust the angle slightly, revolve the foot adjusters. · Do not unlock the foot adjusters while you do not support the projector, to avoid falling of Caution the projector and causing an injury.

  • Page 12: Basic Operations

    Basic operations To project the picture Turn the MAIN POWER switch of the projector on.[ I : ON] · The ON indicator will light up orange. Press the STANDBY/ON button. · The ON indicator blinks (green) and then lights (green).

  • Page 13: To Turn Off The Power

    · The ON indicator lights up orange and the lamp turns off. (About 1 minute later), the fan stops and the indicator blinks orange. · Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in standby mode.

  • Page 14: Adjustments And Functions

    Adjustments and functions Press the MENU ( OFF button. · On-screen menus are displayed on the screen. Select the menu to be adjusted using the MENU ( buttons or MENU STICK SWITCH. · Menu displayed in green is selected. Select the item to be adjusted using the MENU ( buttons or MENU STICK SWITCH.
  • Page 15 Adjustments and functions (continued) SET UP The menu SET UP serves for the change of parameters influencing the picture and for the move picture position. RGB signal input S E T U P I N P U T I M A G E O P T . VOLUME BRIGHT CONTRAST...
  • Page 16 Adjustments and functions (continued) INPUT The menu INPUT serves for the selection of input source. S E T U P I N P U T I M A G E O P T . RGB1 RGB2 VIDEO1 VIDEO2 Adjustment Item RGB 1 RGB 2 VIDEO 1...
  • Page 17 Adjustments and functions (continued) OPT. The menu OPT. allows you to control communication function etc. S E T U P I N P U T I M A G E O P T . COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF START UP S E T U P I N P U T I M A G E O P T .

  • Page 18: Connection To The Video Signal Terminals

    Connection to the video signal terminals 1. Input signal S-VIDEO signal VIDEO signal Input AUDIO signal Output 2. Signal input terminal Video input signal terminals have priority in the following order. Caution S-VIDEO input terminal Connection to the RGB signal terminal 1.

  • Page 19: Example Of Computer Signal

    Note 1: Signal mode Note 2: MAC adapter is necessary to the resolution mode. Projector is compatible with 13 inch mode and 16 inch mode. MAC13"mode=switch 1, switch 5 and switch 6 are ON. MAC16"mode=switch 2, switch 5 and switch 6 are ON.
  • Page 20 Connection to the RGB signal terminal(continued) 4. Initial set signals The following signals are initially set. The settings may be different depending on the computer type. In this case, adjust the settings referring to pages 14, 15. DATA HSYNC Horizontal Timing (µs) Computer/signal VGA-1 PC-9800...

  • Page 21: Connection To The Control Signal Terminal

    (2) Turn the power of the projector on and press the STANDBY/ON switch. The indicator will light. (The ON indicator will light up orange.). (3) Press the INPUT of the projector or RGB 1/2 button of the remote control transmitter and select the input connection.

  • Page 22: Serial Mouse

    SW-L,SEL0 SW-R,SEL1 Serial mouse XA,CLK,SDATA SW-R,SEL1 Serial mouse cannot be operated with provided RS-232C cable. Caution Purchase exclusive serial mouse cable separately. Type name : SC-MS200 (Serial mouse) Projector Computer DATA XB,DATA READY PS/2 cable Projector Computer DATA ( POWER ON )
  • Page 23 (1) Connect the projector and computer using RS 232C cable. (2) Turn off the computer and after computer is setting up, turn on the projector. (3) Select the data speed (COM.SPEED) and the data format (COM.BITS) of the projector. (See page 17) (4) Start communication.
  • Page 24 X1h=Reveal down, X4h=Reveal right, X=0 (slow) ~ 7 (fast) Caution If computer sends the undefined command code or data code, Projector can not guarantee operation. Command is consisted of 2 command bytes and following data bytes. 1-st byte indicates the kinds of commands and the length of command.
  • Page 25 (2)Projector changes itÕs status. (3)Projector reply the command '1xH'+'yyH'+data bytes which indicate status. · (3) data bytes is not always same as (1) data bytes. If projector cannot realize the status of (1) Caution data bytes, projector set the proper status and reply this new setting data bytes or projector reply the error reply '0xH'+'yyH'+data bytes same as (1).

  • Page 26: Example Of System Setup

    · Since both ends of audio cable are the same shape, either end can be connected to any side. However, use the cable with the core set to the projector side. Liquid crystal projector · Turn power off to all devices before connecting.

  • Page 27: Cleaning The Air Filter

    Cleaning the air filter Clean the air filter about every 100 hours or when "CHECK THE AIR FLOW" is displayed. Turn the main power switich off and disconnect the power plug from the power outlet. Remove the air filter from the bottom. Clean the air filter using a vacuum cleaner.

  • Page 28: Lamp

    Also LAMP indicator will light when the lamp becomes too hot. Turn off the power and let the Caution projector cool for 45 minutes. Turn on. If LAMP indicator still lights up red, contact your dealer. 1. How to replace lamp When replacing lamp, turn off and remove AC cord, wait 45 minutes to let lamp cool.

  • Page 29: Message Table

    MENU TIMER BLANK 1) Press the RESET button on projector for 3 seconds or remote control TIMER button for 3 seconds and display the total lamp used time. · When accumulated operation time of the lamp reaches 1700 hours, the following display will appear at the bottom of the screen.

  • Page 30: When You Think Something Wrong

    When inside temperature becomes high because ventilation holes are blocked, normally, TEMP indicator will light red. However, to protect the projector, the lamp may be turned off and at this time LAMP indicator may light red.

  • Page 31: Specifications

    ∑ All specifications are subject to change without notice. Liquid crystal projector Liquid crystal projector Liquid crystal projector Liquid crystal projector CP-S830W/E CP-S830W/E CP-S830W/E CP-S830W/E 3 sheets of liquid crystal panels, 3 primary color lights shutter system 3 sheets of liquid crystal panels, 3 primary color lights shutter system...

This manual is also suitable for:

Cp-s830eCp-s830w

Table of Contents