Advertisement
Step 1
Place Modem near a window and connect the power cable and then
connect to the power socket. After two minutes, check the blue LEDs
(see image below). The number of LEDs lit up indicates the strength
of the signal. Three blue LEDs means you have an excellent signal.
If less than three LEDs are lit, try placing the Modem at different
locations. Sometimes turning the Modem a little can improve your
signal strength.
Step 2
Mark the best location with the "HotSpot" sticker
the box, in case the modem is accidentally moved.
5
Step 3
Connect the telephone to the black input labelled TEL using
telephone cable supplied. Once you hear the dial tone you can start
to make your voice calls.
Note: • Please make sure that "WiMAX"
provided inside
LED's showing signal strength on the
modem are stable before connecting
the laptop or telephone, this typically
takes up to two minutes.
• If you are a data only user, telephone
set is not required.
Front Side
6
Advertisement
