Thermal Fuse - Whirlpool Duet Sport WED8300SW Manual

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

THERMAL FUSE

Refer to page 4-9 for the procedure for ac-
cessing the thermal fuse.
Electric Dryers: The thermal fuse is wired in
series with the drive motor. If the thermal fuse
opens, 91°C (196°F), power to the motor is
turned off. A centrifugal switch on the motor
also opens the heater circuit.
Once the thermal fuse has opened, it will not
reset, and must be replaced. Check for a failed
thermistor, or a shorted heater element.
Gas Dryers: The thermal fuse is wired in
series with the gas valve. If the thermal fuse
opens, 91°C (196°F), power to the valve is
turned off. A centrifugal switch on the motor
also opens the heater circuit.
Once the thermal fuse has opened, it will
not reset, and must be replaced. Check for a
failed thermistor.
Electrical Shock Hazard
Thermal Fuse
91°C (196°F)
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Disconnect the wires from the thermal
fuse.
4. Set the ohmmeter to the R X 1 scale.
5. Touch the ohmmeter test leads to the
thermal fuse terminals. The meter should
indicate continuity (0 Ω). If the meter in-
dicates an open circuit (infinite), replace
the thermal fuse.
5-3
Blower Housing